1. EECE6017 Lab 5 My First HPS with GPIO
Prelab Activities:
Complete the homework given for Lab 4
Go Through the training “DE0-Nano-SoC_My_First_HPS.pdf” from the Lab manual
Download the SoC EDS Design Suite from - Refer to System Requirements in DE0-Nano-SoC_My_First_HPS.pdf before starting the lab
Demonstrate the my_first_hps project in the DE0-Nano-SoC_v.1.1.0_SystemCD\Demonstrations\SoC\my_first_hps folder
Work to be done during this lab:
Turn in assignments from lab 4 (if you have not completed these, turn them in at the beginning of lab)
Questions on Lab 5 : Discuss the program as given in my_first_hps sample and come up with questions if there are any.
Demonstrate advanced HPS Examples provided in the DE0-Nano-SoC_v.1.1.0_SystemCD
Revise team member assignments (if necessary).

2. EECE6017 Lab 5 My First HPS with GPIO
Read Chapter 6 - Examples For FPGA from DE0-Nano-SoC_User_manual.pdf
Go through 6.1 and 6.2 to understand the Software development procedure to use the peripheral connected to HPS and demostrate the project hps_gpio from Demonstrations\SOC folder (instruction are given in the user manual).
Use Altera SoC EDS to build the software with HPS. Please refer to Chapter 5 "Running Linux on the DE0-Nano-SoC board" from the DE0- Nano-SoC_Getting_Started_Guide.pdf to run Linux on DE0-Nano-SoC board.
Be sure to understand the Software API used in this exercise
Show the output with HPS_LED, that will flash twice and you may control the user LED with push-button

3. Homework: Study accelerometer ADXL345 from its datasheet
From the instructions given in the manual, demonstrate the sample application, hps_gsensor in board
Learn to use ARM software build tools with this exercise