1. Lab0 : Instructions
ECE ECE at UMass

2. Purpose To be familiar with ALTERA DE2 Board To check any inferiority
Please check if your board works correctly
Will not be graded
You can control your board by a given software

3. Step by step Install all necessary softwares Install USB driver
Reference : DE2 CD -> install_instruction
Install USB driver
Connect Board
C:\\altera\81\quartus\drivers\usb-blaster
Open Quartus -> Tool-> Programmer
Click “Hardware Setup”
You should see “USB-blaster” in available hardware list
Select “USB-blaster” for Current selected hardware
Board test by using control panel.exe
Enjoy with your LED, LCD, seven segment and etc.
Reference : DE2 CD -> DE2_UserManual.pdf.