1. Estimated implementation time
[Bottle Gate]
Short Description
A new kind of bottle lock mechanism that can avoid using the current bottle end cups.
Benefit for consumer
This design is intended for avoiding beverage bottle end cups. The design have adantage over the eexisting ones in the fact that as long as the bottle is in a good condition the gate can be re used again since the gate do not get out of the bottle, the bottle can be sealed back after opening manually, it avoids end cup production which lower cost, the bottle does not need tool to be opened, does not add waste to the environment like existing ones, fun and easy to use and so on. For more information
Technical details
Visual
Mechanism- This design has simple mechanism. To open one only have to pull out the small handle of the gate. Then the gate will free itself from the grooved bottle having small lock on the inside. The by pulling until the other end the bottle can be opened. For sealing back just push the gate inside to lock it with the inner part of grooved with lock bottle. While drinking the fluid will not spill because the bottle will be 100 percent sailed when it is opened.
Investments
Risk mitigation
Estimated implementation time
Cost analysis depends on the bottle
We use and will be submitted when
The project is accapted.
There is no risk concerning the design.
This design can be implemented in
Matter of days all we need is the mold
For production.
Andrey