Presentation is loading. Please wait.

Presentation is loading. Please wait.

Aligned with ReNew Thrust 15

Published by妊俞 强 Modified over 5 years ago

Similar presentations

Presentation on theme: "Aligned with ReNew Thrust 15"— Presentation transcript:

1 Aligned with ReNew Thrust 15
“CAD-centric” Integrated Multi-physics Simulation Predictive Capability for Plasma Chamber Nuclear Components Aligned with ReNew Thrust 15 Unlike FSP, the integrated modeling is progressed in a smaller scale fashion A. Ying (UCLA), R. Reed (graduate student), R. Munipalli (HyPerCom) Acknowledgements to graduate(d) students M. Narula, R. Hunt, and H. Zhang (UCLA) Others working on separate parts of the subject M. Abdou, M. Ulrickson (and team), M. Sawan (and team), M. Youssef, B. Merrill FNST meeting August 2, 2010 UCLA

2 Integrated Simulation Predictive Capability (ISPC) as a part of ReNeW Thrust 15: Creating integrated models for attractive fusion power systems ReNeW Thrust 15 Integrated Model Objectives: Develop predictive modeling capability for nuclear components and associated systems that are science-based, well-coupled, and validated by experiments and data collection. Extend models to cover synergistic physical phenomena for prediction and interpretation of integrated tests and for optimization of systems. Develop methodologies to integrate with plasma models to jointly supply first wall and divertor temperature and stress levels, electromagnetic responses, surface erosion, etc. Today’s Trend in Simulation: Treat complexity of entire problem Extreme geometric complexity Multi-physics, Multi-scales Inter-disciplinary approach Modernize codes & Interpret phenomena from interrelated scientific disciplines High accuracy & thorough understanding at each level Interactive visualization and post processing (Intelligent Expert System) 2

3 “ITER Baking in progress”
An integrated model tool potentially contributes to more efficient FNST R&D Provide high level of accuracy and substantially reduce risk and cost for the development of complex plasma chamber in-vessel components Facilitate simulation of normal and off normal operational scenarios. Offer capabilities for system optimization Allow insight and intuition into the interplay between key multi-physics phenomena (occurring at a level where instruments cannot be installed.) Better understand the state of the operation through limited diagnostics The time-dependent BLKT outlet temperature can be used in RELAP5 system code for heating control analysis. The flow pattern and associated heat transfer inside a FW/BLKT is very complex, which RELAP5 cannot model. FW/BLKT temperature response with time with water inlet temperature at 10K/h ramp-up rate. “ITER Baking in progress” BLKT-12 CATIA model FW (Be) Shield Module

4 CAD-centric modeling tools are being used in the US ITER FW/Blanket Shield Design (design by analysis) (led by Mike Hechler-ORNL and Mike Ulrickson-SNL) Mechanical load under a disruption Snapshots of velocity magnitudes at different pipes (BLKT-12 SM) Nuclear heating profile CFD/thermo-fluid X-Y plane (8 cm above mid-plane) FW/BLKT-12

5 ITER FW/shield design still evolving Rows or panels affected
Design by analysis incorporating CAD model becomes even more important in regard to first wall panels shaped as local limiters ITER FW/shield design still evolving In recent design, slot was removed The heat flux profile is extremely non-uniform: heat flux as high as 5 MW/m2 (7.5 MW start-up and ramp down), 40% of wall EHF modules A shaped FW design brings forth the importance of using “prototype” in the analysis location Peak heat flux Rows or panels affected Inboard : start-up 4.4 MW/mm² 3,4 Outboard 3.6 MW/m² 14,15,16,17 Shine thru 4.0 MW/m² 6 panels on rows 15,16 Top 4.6 MW/m² Reference: R. Mitteau et. al., Heat loads and shape design of the ITER first wall, ISFNT-9 (2009) CuCrZr Von Mises (Pa) CuCrZr

6 DCLL He-coolant inlet manifold
Simulation performed on an engineering CAD model allows practical design assessments Mid-plane nuclear heating (gamma: left; neutron: right) W/cc Location of the instrument and the associated perturbation to the data Analysis with a detailed geometric drawing with instrumentations in-place needed Thermomechanics Analysis Proper manifold designs to provide uniform flow distributions among many parallel flow paths Adequate cooing to all parts DCLL He-coolant inlet manifold He-velocity High temperature at upper structures PbLi velocity Velocity :m/s Stress concentration Initial results with simplified geometry & operating condition Inlet to 2nd FW cooling panel ISPC can potentially reduce risk and cost of the component development

7

8 Hybrid code ADVANTG (MCNP + Denovo)
What numerical software are available for CAD-centric integrated model? ITER 40o A-lite Neutronic model (many neutronics codes available: deterministic or Monte Carlo) MOAB & CGM CAD Voxels MCNP(X) MCNPX Native Geometry (Other) DAG-MCMP ITER FW Panel Attila: Commercial Software Tetrahedral mesh Hybrid code ADVANTG (MCNP + Denovo) ORNL Attila is now being used to calculate radioactivity of components MCNP – MCAM Community Developed Orthogonal mesh Total (neutron + photon) flux

9 Solving individual physics using its optimized numerical technique and running simultaneously with a smart transfer of information Adopting one numerical technique for all simulations in ISPC can limit the size of the problem and is undesirable. Overcoming CAD discrepancy (e.g. overlapping) is common source of difficulty for MCNP Sample analysis codes and mesh requirements in ISPC Physics Analysis code Mesh specification Neutronics MCNP Monte Carlo mesh tally (cell based) Attila Unstructured tetrahedral mesh (node based) Electro-magnetics OPERA (Cubit) Unstructured tetrahedral (Hex-) mesh (node based) ANSYS Unstructured Hex/Tet mesh (node based and edge based formulations) CFD/ Thermo-fluids SC/Tetra Unstructured hybrid mesh (node based) Fluent/CFX etc. Unstructured hybrid mesh (cell based) MHD HIMAG Structural analysis ANSYS/ ABAQUS Unstructured second order Hex/Tet mesh (node based) Species transport COMSOL or others: TMAP, ASPEN Unstructured second order mesh (node based) Safety RELAP5-3D MELOCR System representation code DAG-MCNP (UW) Imprinting A F B C E D Merging 9

10 A multi-disciplinary effort
Integration of computational software forms the heart of FNST performance prediction Data mapping and interpolation across various analysis meshes/codes has to be fast, accurate and satisfy physical conservation laws Large scale simulation, leading-edge high performance computing, advanced computational methods, and the development and application of new mathematical models Verification & Validation Material database/Constitutive equations/ Irradiation effect CAD- Geometry Mesh services Adaptive mesh/ mesh refinement Visualization Data Management: Interpolation Neutral format Time step control for transient analysis Partitioning Parallelism Neutronics Radiation damage rates Thermo-fluid Species (e.g. T2) transport Electro-magnetics MHD Coupled effect Special module Radioactivity Transmutation Safety e.g. source Structure/ thermo-mechanics

11 ISPC Design Process Flow
Maintain consistency in the geometric representation among the analysis codes The CAD-based solid model is the common element across physical disciplines FW/Plasma Facing Surface Phenomena profile FW/PFC Thermo-fluid Neutron source profile Neutronics CAD Model q” DMS Thermo-fluid & LM MHD FUN * Electromagnetics 3-D design iterative assessment important DMS DMS Stress/Deformation-Analysis Specialized physics models FUN * Structural Support Tremendous work for ITER FW/SB at SNL Species Transport FUN specialized user FUNction Safety or Transient events Data Mapping Script

12 Need experimental data for code verification & validation
RF-CHF Within ITER project, some R&D being carried out and providing data for design support and code benchmark TCs installed in the mockup have provided data US-CHF mock-up Jet impingement He inlet He outlet Temperature and He flow characteristics under 10 MW/m2 Verification/validation needed on integration method

13 “How to” incorporate a bigger resource into ISPC?
Similar efforts are being pursued in various fields: within DOE Vision 21 project (Improved asset optimization by integrating ASPEN PLUS and FLUENT) Nuclear Energy and Simulation Hub FSP (Fusion Simulation Project) Advanced computational tools are continuously being developed in various projects: SciDAC, ITAPS, CCA, etc. “to apply existing modeling and simulation capabilities to create a user environment that allows engineers to create a simulation of a currently operating reactor that will act as a "virtual model" of that reactor.---” Nuclear Energy Innovation Hub Look for synergism Not re-inventing the wheel but riding on state-of-the-art methodology

14 Next Steps How do you see this moving forward?
Three activities (ITER FW/shield design, TBM program, and FNSF assessment study) provide mechanism, panorama, and opportunity for the development/ benchmark/test of the idea to the extent possible. However, a substantial effort requires FSP-like or NESH-like commitment Near term goal Continue to build/enhance interface and data management (increase degree of automation) Establish test cases to further explore the limit of the capability Example test cases Enhance existing neutronics computational platform for TBM radioactive dose calculations extended to ITER port cell area FNSF tritium breeding assessment through a complete 3-D base breeding blanket exploratory design analysis Develop schemes to link to plasma facing surface phenomena, and address FW tritium inventory and permeation losses Periodic recovery of implanted tritium has an impact on the TBR requirement; however, its degree of impact is affected by losses from tritium permeation into FW coolant

15 Summary Adopt the state-of-the-art computer technique, high-powered computing, advanced modeling and simulation that is 3-dimensional, high-resolution Develop highly integrated predictive capabilities for many cross-cutting scientific & engineering disciplines and deliver faster and more detailed insights into the R&D of in-vessel FNST components and systems Imagine if critical performance parameters can be projected and examined in advance---- The goal of an integrated simulation effort then is to be able to model and design a complete DEMO system including irradiation effects, thermofluid/MHD, temperatures and mechanical loads, tritium accountability in entire system (tritium retention, and tritium production and transport processes), and FW/divertor erosion.

Download ppt "Aligned with ReNew Thrust 15"

Similar presentations

CFD Analysis for ITER FW/Shield Designs Alice Ying, Ryan Hunt, Hongjie Zhang (UCLA) Dennis Youchison James Bullock, Mike Ulrickson (SNL) July 8, 2009 MIT,

CFD Analysis for ITER FW/Shield Designs Alice Ying, Ryan Hunt, Hongjie Zhang (UCLA) Dennis Youchison James Bullock, Mike Ulrickson (SNL) July 8, 2009 MIT,
1 Summary Slides on FNST Top-level Technical Issues and on FNSF objectives, requirements and R&D Presented at FNST Meeting, UCLA August 18-20, 2009 Mohamed.

1 Summary Slides on FNST Top-level Technical Issues and on FNSF objectives, requirements and R&D Presented at FNST Meeting, UCLA August 18-20, 2009 Mohamed.
Hongjie Zhang Purge gas flow impact on tritium permeation Integrated simulation on tritium permeation in the solid breeder unit FNST, August 18-20, 2009.

Hongjie Zhang Purge gas flow impact on tritium permeation Integrated simulation on tritium permeation in the solid breeder unit FNST, August 18-20, 2009.
First Wall Heat Loads Mike Ulrickson November 15, 2014.

First Wall Heat Loads Mike Ulrickson November 15, 2014.
ASIPP Zhongwei Wang for CFETR Design Team Japan-US Workshop on Fusion Power Plants and Related Advanced Technologies February 26-28, 2013 at Kyoto University.

ASIPP Zhongwei Wang for CFETR Design Team Japan-US Workshop on Fusion Power Plants and Related Advanced Technologies February 26-28, 2013 at Kyoto University.
CFD and Thermal Stress Analysis of Helium-Cooled Divertor Concepts Presented by: X.R. Wang Contributors: R. Raffray and S. Malang University of California,

CFD and Thermal Stress Analysis of Helium-Cooled Divertor Concepts Presented by: X.R. Wang Contributors: R. Raffray and S. Malang University of California,
Thermo Fluid Design Analysis of TBM cooling schemes M. Narula with A. Ying, R. Hunt, S. Park ITER-TBM Meeting UCLA Feb 14-15, 2007.

Thermo Fluid Design Analysis of TBM cooling schemes M. Narula with A. Ying, R. Hunt, S. Park ITER-TBM Meeting UCLA Feb 14-15, 2007.
09 FNST meeting Preliminary Neutronics Analysis for IB Shielding Design on FNSF (Standard Aspect Ratio) Haibo Liu Robert Reed Fusion Science and Technology.

09 FNST meeting Preliminary Neutronics Analysis for IB Shielding Design on FNSF (Standard Aspect Ratio) Haibo Liu Robert Reed Fusion Science and Technology.
FNSF Blanket Testing Mission and Strategy Summary of previous workshops 1 Conclusions Derived Primarily from Previous FNST Workshop, August 12-14, 2008.

FNSF Blanket Testing Mission and Strategy Summary of previous workshops 1 Conclusions Derived Primarily from Previous FNST Workshop, August 12-14, 2008.
First Wall Thermal Hydraulics Analysis El-Sayed Mogahed Fusion Technology Institute The University of Wisconsin With input from S. Malang, M. Sawan, I.

First Wall Thermal Hydraulics Analysis El-Sayed Mogahed Fusion Technology Institute The University of Wisconsin With input from S. Malang, M. Sawan, I.
Thermo-fluid Analysis of Helium cooling solutions for the HCCB TBM Presented By: Manmeet Narula Alice Ying, Manmeet Narula, Ryan Hunt and M. Abdou ITER.

Thermo-fluid Analysis of Helium cooling solutions for the HCCB TBM Presented By: Manmeet Narula Alice Ying, Manmeet Narula, Ryan Hunt and M. Abdou ITER.
June 14-15, 2007/ARR 1 Trade-Off Studies and Engineering Input to System Code Presented by A. René Raffray University of California, San Diego With contribution.

June 14-15, 2007/ARR 1 Trade-Off Studies and Engineering Input to System Code Presented by A. René Raffray University of California, San Diego With contribution.
The shield block is a modular system made up of austenitic steel SS316 LN-IG whose main function is to provide thermal and nuclear shielding of outer components.

The shield block is a modular system made up of austenitic steel SS316 LN-IG whose main function is to provide thermal and nuclear shielding of outer components.
Status of safety analysis for HCPB TBM Susana Reyes TBM Project meeting, UCLA, Los Angeles, CA May 10-11, 2006 Work performed under the auspices of the.

Status of safety analysis for HCPB TBM Susana Reyes TBM Project meeting, UCLA, Los Angeles, CA May 10-11, 2006 Work performed under the auspices of the.
Integrated Effects of Disruptions and ELMs on Divertor and Nearby Components Valeryi Sizyuk Ahmed Hassanein School of Nuclear Engineering Center for Materials.

Integrated Effects of Disruptions and ELMs on Divertor and Nearby Components Valeryi Sizyuk Ahmed Hassanein School of Nuclear Engineering Center for Materials.
Status of 3-D Analysis, Neutron Streaming through Penetrations, and LOCA/LOFA Analysis L. El-Guebaly, M. Sawan, P. Wilson, D. Henderson, A. Ibrahim, G.

Status of 3-D Analysis, Neutron Streaming through Penetrations, and LOCA/LOFA Analysis L. El-Guebaly, M. Sawan, P. Wilson, D. Henderson, A. Ibrahim, G.
THERMOFLUID MHD for ITER TBM. CURRENT STATUS By UCLA Thermofluid MHD GROUP Presented by Sergey Smolentsev US ITER TBM Meeting UCLA May 10-11, 2006.

THERMOFLUID MHD for ITER TBM. CURRENT STATUS By UCLA Thermofluid MHD GROUP Presented by Sergey Smolentsev US ITER TBM Meeting UCLA May 10-11, 2006.
Multiple effects for HT DCLL Presented by Neil Morley University of California, Los Angeles US-EU DCLL Workshop November 14-15, 2014 Slides from my colleagues.

Multiple effects for HT DCLL Presented by Neil Morley University of California, Los Angeles US-EU DCLL Workshop November 14-15, 2014 Slides from my colleagues.
A design for the DCLL inboard blanket S. Smolentsev, M. Abdou, M. Dagher - UCLA S. Malang – Consultant, Germany 2d EU-US DCLL Workshop University of California,

A design for the DCLL inboard blanket S. Smolentsev, M. Abdou, M. Dagher - UCLA S. Malang – Consultant, Germany 2d EU-US DCLL Workshop University of California,
APPLICATION: The first real application of the CAD-MCNP coupling approach is to calculate the neutron wall loading distribution (Γ) in the Z and toroidal.

APPLICATION: The first real application of the CAD-MCNP coupling approach is to calculate the neutron wall loading distribution (Γ) in the Z and toroidal.

Similar presentations

Ads by Google