1. XYZ Port Facility Maritime Security Drill
Briefing for Controllers
date

2. Contiguous Zone Security – Vehicle
Vehicle Loitering Outside the Port Facility
Drill D221

3. Scope
Date, time, location
Aim
Objectives
Desired outcomes
Controllers
Players
Materials
Scenario
Master Events List
Controller Tasks
Communications
Safety
Debrief

4. Drill number: X/XX
Date:
Start Time:
Location:
Estimated End Time:

5. Aim
To enhance the proficiency of port facility security staff in monitoring the contiguous zone of the port facility.

6. Objectives
Security staff required to notice the suspicious vehicle within the required time as stated in the PFSP.
Security staff required to handle the suspicious vehicle according to procedures in the PFSP.

7. Desired outcomes
Security staff will be able to:
Effectively monitor the contiguous zone.
Take the necessary actions to deal with suspicious activities in the contiguous zone.
Deter suspicious activities from taking place in the contiguous zone.

8. Control Team
Chief Controller: PFSO, Mr. AAA
Simulators
 Driver – Mr/Ms. XXX
 Passenger – Mr/Ms. YYY

9. Players
Security staff on duty

10. Materials
Vehicle
Camera with telephoto lens

11. Scenario
A syndicate plans to use port facilities as a conduit for smuggling contrabands.
Syndicate members have been tasked to probe various port facilities in the region in order to determine the effectiveness of the security.

12. Master Events List S/N Time Event From To Means of Delivery
Expected Response
Remarks
001
0900
All participants in position
002
0905
Drill commence
Chief Controller
All
Walkie Talkie
None
“Drill Start”
003
0915
Drive perimeter, stopping at various locations and entrances.
Potential intruders
Security Staff
Walk around port facility
Did the security staff notice the suspicious activities?
Discuss and point observe people & vehicles, take photos
004
1030
Stop car, attempt to scale the outer perimeter fence or wall.
Respond to attempted intrusion
Isolated location. Depart after 5 minutes
005
1100
Drill completed
Dispersal of personnel/ equipment
“Drill End”
006
1130
Hot Wash
N/A

13. Controller Tasks
Commencing near one end of the Port Facility
entrance, the intruders are to drive slowly
around the perimeter
Pause frequently to chat, take photo and look towards installations in the Port Facility, stop at entrances to the Port Facility, take photos
If questioned, give excuses such as taking photos for interest , feign ignorance, just driving or taking a break from driving.

14. Controller Tasks
Do not make any attempt to conceal yourselves
Be prepared for intervention by security forces
Carry the “Letter of Identification” and tender it if harassed

15. Communications
Mobile phone
Walkie-Talkie
Player – Ch YY
Controllers – Ch ZZ

16. Code words Drill Start The drill is to commence Drill Suspend
The drill is temporarily suspended
Drill Go
The drill is to resume from where it was suspended
Drill Stop
The drill is to be terminated (prematurely)
Drill End
The drill is completed
Drill, Drill, Drill
The message or statement that follows this preamble relates to the drill only, and is not to be confused with real activity

17. Safety Physical safety of personnel is paramount
There is to be no physical contact between player and controllers acting as intruders, etc.
Security staff are not to use abusive language when talking to controllers acting as “intruders”
Do not neglect the safety of equipment

18. Debrief
Location:
Secretary:
Attendance

19. Any questions ?