1. Lecture 1.12 – SolidWorks Toolbox Creating gears
EML 2023 – Modeling, Parts
Lecture 1.12 – SolidWorks Toolbox
Creating gears

2. Nomenclature

3. Point P
The velocity of point P in the small gear must equal the velocity of point P in the large gear.
Thus

4. Two gears that mate must have the same diametral pitch.

7. Using SolidWorks toolbox to model the gears.

10. Right click on the Spur Gear icon and select ‘Create Part’.
Answer several questions.
‘Save As’ your part.

11. To ‘disconnect’ the part from the toolbox -
SWFixToolboxParts1-4