1. View Results of your Multiple Load Cases in a single Output Report 1

2. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 2 View Results of your Multiple Load Cases in a single Output Report. In TRIFLEX you can select the following reports: Restraint Forces and Moments System Forces and Moments Anchor Forces and Moments Piping System Movements Anchor Movements Restraint Movements (more in the future)

3. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 3 Using version 2.6.2 or greater Using TRIFLEX ® Windows version 2.6.2 or greater This is only one example. Now we want the Loads on Anchor Point 10 but, ALL load cases in one table For comparison

4. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 4 Run the Analysis, then Output, View Analysis Results Output, View Analysis Results.

5. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 5 Now choose Anchor Forces and Moments from the Output Tables Output Table, Anchor Forces and Moments.

6. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 6 Control – Click, on the line for Anchor Node Point 10 Control - Click, Anchor Node Point 10.

7. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 7 Click the radio button for, Order by Case. Click, Order By Case.

8. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 8 Note: the two additional buttons that are now added. Here I selected: Show Base Operating Cases.

9. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 9 Note: the two additional buttons that are now added. Here I selected: Show All Cases.

10. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 10 The User can now use this table for a Written Report. The User can now copy this Table to his Final Written Report. Using previous techniques developed in TRIFLEX ® Windows.

11. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 11 But now we want the Vertical Loads only on Five Restraints. But across all Load Cases. Now we will show a different example. The Five Vertical Restraints shown with the Up Arrows.

12. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 12 Now choose Restraint Forces and Moments from the Output Tables

13. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 13 Choose the Five Cells which correspond to the Vertical Load on its associated Restraint. Control Click to select each Cell

14. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 14 The Result for selected cells: The User can now copy this Table to his Final Written Report. Using previous techniques developed in TRIFLEX ® Windows

15. www.pipingsolutions.com TRIFLEX ® Windows Multiple Load Cases – Single Report 15 For more details please contact: 6219 Brittmoore Road Houston, Texas 77041-5114 U.S.A. Voice: 713 849 3366 Fax: 713 849 3654 : info@pipingsolutions.com