1. Hand and Power Tool Safety

2. Introduction
Review online course content.
Review questions.

3. Workshop Objectives
Participate in discussions, demonstrations, and hands-on activities that will enable you to:
Identify which tools are required.
Use hand tools safely and efficiently.
Use power tools safely and efficiently.

4. General Tool Safety Safe practices How to know which tool to use
Difference between residential and commercial sites
Correct use of personal protective equipment (PPE)
Activity Worksheets #1, #2, #3

5. Hand Tool Safety Safe practices for using common tools:
Screwdrivers
Hammers
Pliers
Wrenches
Hand saws
Activity Worksheet #4
Image-Retrieved July

6. Power Tool Safety OSHA hand and power tool safety guidelines
Activity Worksheet #5
Image Retrieved July

7. Inspection and Maintenance
Power tool inspection and maintenance
How to lubricate, tighten and replace worn tool components
Working with safety
guards and switches
Activity Worksheet #6
Image Retrieved July

8. Liquid Fuel Power Tools
Safe practices
Check for leaks.
Always use PPE when using liquid fuel power tools.
Activity Worksheet #7

9. Circular Saws, Belt Sanding and Abrasive Wheel Tool Safety
Safety guidelines and requirements for:
Portable circular saws
Portable belt sanding machines
Portable abrasive wheels
Hydraulic jacks
Activity Worksheet #8
Image retrieved July

10. Sources Occupational Safety and Health Administration (OSHA)
Compressed Gas Association (CGA)
US Department of Transportation (FHWA)
American National Standards Institute (ANSI)
Code of Federal Regulations:
1910 Subpart P, Hand and portable powered tools and other hand-held equipment 
1926 Subpart I, Tools - hand and power 
1910 Subpart O, Machinery and Machine Guarding
1910 Subpart Q, Welding, Cutting, and Brazing
1910 Subpart S , Electrical
1926 Subpart F, Fire Protection and Prevention
1926 Subpart K, Electrical
1926 Subpart V, Power Transmission and Distribution

11. Open Discussion
Questions
Comments