1. Smart Grid Update – January 2011
doc.: IEEE /0028r0
January 2011
Smart Grid Update – January 2011
Name
Company
Address
Phone
Bruce Kraemer
Marvell
5488 Marvell Lane,
Santa Clara, CA, 95054
Date: 2011-January-10
Abstract:
NIST PAP#2 Status
Australian Smart Metering
Bruce Kraemer, Marvell
Bruce Kraemer (Marvell)

2. Call Topics Agenda Topics for this call PAP2 Report Status
January 2011
Call Topics
Agenda Topics for this call
PAP2 Report Status
New Australian Smart Metering RFI
Additional topics for LA
SGIP news
UK Consultation Status
FG-Smart in ITU
Bruce Kraemer, Marvell

3. Schedule as of Nov 2010 NIST Timeline January 2011 Draft 0.5
doc.: IEEE /0028r0
January 2011
NIST Timeline
Schedule as of Nov 2010
Draft 0.5
July 28, 2010
Call for Input to Section 6
August 4, 2010
End of draft 0.5 review period
September 15, 2010
SGIP face-to-face, St Louis
Tentative PAP 2 meeting
September 16, 2010
September 30, 2010
Release of draft 0.6
October 29, 2010
End of draft 0.6 review period
November 4, 2010
OpenSG meeting, Miami
Tentative PAP 2 meeting
December 3, 2010
SGIP face-to-face, Chicago
PAP 2 meeting
Release of Version 1
Bruce Kraemer, Marvell
Bruce Kraemer (Marvell)

4. Schedule as of Jan 2011 NIST Timeline January 2011 Draft 0.5
doc.: IEEE /0028r0
January 2011
NIST Timeline
Schedule as of Jan 2011
Draft 0.5
July 28, 2010
Call for Input to Section 6
August 4, 2010
End of draft 0.5 review period
September 15, 2010
SGIP face-to-face, St Louis
Tentative PAP 2 meeting
September 16, 2010
September 30, 2010
Release of draft 0.6
October 29, 2010
End of draft 0.6 review period
November 4, 2010
OpenSG + PAP2 meeting, Fort Lauderdale
December 3, 2010
Extended edit period
January 15, 2011
Release of Version 1
Continuation of project to extend findings
June/July 2011
Release of Version 2
Bruce Kraemer, Marvell
Bruce Kraemer (Marvell)

5. January 2011
NIST PAP2
Version 0.6 was reviewed extensively in 802 and suggested changes generated by group and documented in 1316r4 were supplied to NIST (Doc 1396-r3)
NIST Version 1.0 of the PAP2 report is expected to be available for review around January 15
perhaps in time for the Los Angeles meeting.
Bruce Kraemer, Marvell

6. January 2011
Australia
Australia has issued a call for candidates for their Smart Metering HAN
Responses from 802 should be provided
Probably best from individual WG, e.g , but some coordinated discussion required
Because of the tight association of technology to metering application functionality, responses to many of the questions will be very difficult
Bruce Kraemer, Marvell

7. January 2011
More Details
The NSMP HAN interface standard RFI document, and the Smart Metering Infrastructure Minimum Functionality Specification documents are published below (under BRWG documentation) or downloaded via the following links:
NSMP - HAN interface standard RFI version 1.1, PDF, 156KB
BRWG deliverable 01 - Smart Metering Infrastructure (SMI) Minimum Functionality Specification v1.1, PDF, 1237KB
~ 100 additional documents on meetings minutes, requirements, national goals, etc can be found on the web site.
Bruce Kraemer, Marvell

8. January 2011
Australian HAN RFI
Request for information– home area network (HAN) interface standard
The NSSC is required under its terms of reference to provide advice to the Ministerial Council on Energy's (MCE's) Standing Committee of Officials (SCO) on an open standard to support the provision of a home area network (HAN) for customers using the smart metering infrastructure. The NSSC has issued a request for information (RFI) to standard organisations to provide information on the capabilities of their HAN standard to meet the minimum functionality requirements for a HAN. The objectives of the RFI are to confirm that:
the HAN minimum functionality requirements (section 7.9 of the Smart Metering Infastructure Minimum Functionality Specification, version 1.1) are clearly understood and unambiguously stated
one or more standards are capable of meeting the minimum functionality requirements for a HAN interface
Bruce Kraemer, Marvell

9. Australian HAN RFI January 2011
The schedule for the RFI is as follows:
20 December 2010 Issue the RFI to standards organisations
21 January 2011 Standards organisations to register their participation via
31 January 2011 Closing date for questions
11 February 2011 Submissions due date
14 to 25 February 2011 Preparation of initial evaluation and first draft of review to be sent to the BRWG
28 February 2011 Issue RFI draft evaluation to the BRWG
8-9 March 2011 First BRWG workshop review
10-18 March 2011 BRWG's HAN Technical Group work (as required)
5-6 April 2011 Final BRWG workshop review
12 April 2011 Submission of the RFI report and Smart Metering Infrastructure Functionality Specification Change Control to the NSSC
20 April 2011 NSSC meeting
May 2011 Issue HAN interface standard report to the MCE's SCO
Bruce Kraemer, Marvell

10. January 2011
RFI Sample
Bruce Kraemer, Marvell

11. January 2011
RFI Sample
Bruce Kraemer, Marvell

12. January 2011
difficult to respond
Bruce Kraemer, Marvell

13. Basic Project Plan 802.11 submitted notification of intent to respond.
January 2011
Basic Project Plan
submitted notification of intent to respond.
Use Jan 12 call to raise awareness & determine how/if to respond
Use Smart Grid ad hoc meetings in LA to
Coordinate with
generate questions
identify volunteers
prepare initial responses
Use reflector and subsequent calls to finalize responses prior to Feb 11 deadline
Bruce Kraemer, Marvell