Presentation is loading. Please wait.

Presentation is loading. Please wait.

Fig. 1. Observation of LAVA surfaces: (A, C, E): top surfaces of sandblasted CAD/CAM blocks; (B, D, F): cross-sectional view; the specimens were sandblasted.

Published byAnna Péterné Modified over 5 years ago

Similar presentations

Presentation on theme: "Fig. 1. Observation of LAVA surfaces: (A, C, E): top surfaces of sandblasted CAD/CAM blocks; (B, D, F): cross-sectional view; the specimens were sandblasted."— Presentation transcript:

1 Fig. 1. Observation of LAVA surfaces: (A, C, E): top surfaces of sandblasted CAD/CAM blocks; (B, D, F): cross-sectional view; the specimens were sandblasted for 15 seconds, 30 seconds, and 60 seconds. The top surface figures show a rough surface for LAVA CAD/CAM blocks after sandblasting. However, a small crack is observed on the surface of the LAVA sample that was sandblasted for 30 seconds. Fig. 1. Observation of LAVA surfaces: (A, C, E): top surfaces of sandblasted CAD/CAM blocks; (B, D, F): cross-sectional view; the specimens were sandblasted for 15 seconds, 30 seconds, and 60 seconds. The top surface figures show a rough surface for LAVA CAD/CAM blocks after sandblasting. However, a small crack is observe… J Adv Prosthodont Jun;10(3):

Download ppt "Fig. 1. Observation of LAVA surfaces: (A, C, E): top surfaces of sandblasted CAD/CAM blocks; (B, D, F): cross-sectional view; the specimens were sandblasted."

Similar presentations

Surface Area of a Cylinder h A cylinder is a prism with a circular cross-section. 2r2r.

Surface Area of a Cylinder h A cylinder is a prism with a circular cross-section. 2r2r.
Fig. 4-1, p. 107. Fig. 4-2, p. 109 Fig. 4-3, p. 110.

Fig. 4-1, p Fig. 4-2, p. 109 Fig. 4-3, p. 110.
Sections SECTION C3 SECTION B1 SECTION A2 C B 321 118A38414 E Click a surface to view a section from close by Next.

Sections SECTION C3 SECTION B1 SECTION A2 C B A38414 E Click a surface to view a section from close by Next.
P.464. Table 13-1, p.465 Fig. 13-1, p.466 Fig. 13-2, p.467.

P.464. Table 13-1, p.465 Fig. 13-1, p.466 Fig. 13-2, p.467.
Fig. 11-1, p. 359. p. 360 Fig. 11-2, p. 361 Fig. 11-3, p. 361.

Fig. 11-1, p p. 360 Fig. 11-2, p. 361 Fig. 11-3, p. 361.
Table 6-1, p. 161. Fig. 6-1, p. 162 p. 163 Fig. 6-2, p. 164.

Table 6-1, p Fig. 6-1, p. 162 p. 163 Fig. 6-2, p. 164.
P247. Figure 9-1 p248 Figure 9-2 p251 p251 Figure 9-3 p253.

P247. Figure 9-1 p248 Figure 9-2 p251 p251 Figure 9-3 p253.
Figure 1.1 The observer in the truck sees the ball move in a vertical path when thrown upward. (b) The Earth observer views the path of the ball as a parabola.

Figure 1.1 The observer in the truck sees the ball move in a vertical path when thrown upward. (b) The Earth observer views the path of the ball as a parabola.
Geometry 12.1/2 Representations of 3-d Figures Surface Area of Prisms and Cylinders.

Geometry 12.1/2 Representations of 3-d Figures Surface Area of Prisms and Cylinders.
Airfoil Terminology and Pressure Distribution Lecture 3 Chapter 2.

Airfoil Terminology and Pressure Distribution Lecture 3 Chapter 2.
„Moderné vzdelávanie pre vedomostnú spoločnosť/Projekt je spolufinancovaný zo zdrojov EÚ“ Inovácia obsahu a metód vzdelávania prispôsobená potrebám vedomostnej.

„Moderné vzdelávanie pre vedomostnú spoločnosť/Projekt je spolufinancovaný zo zdrojov EÚ“ Inovácia obsahu a metód vzdelávania prispôsobená potrebám vedomostnej.
Space Figures & Cross-Sections

Space Figures & Cross-Sections
Relative Dating Earth Science 2015. What is it? Relative dating is the process of identifying the relative ages of the layers of the Earth. The goal of.

Relative Dating Earth Science What is it? Relative dating is the process of identifying the relative ages of the layers of the Earth. The goal of.
1 Improving the fatigue life of electro- discharge-machined SDK11 tool steel via the suppression of surface cracks Assistant : Wan-Ching Weng Department.

1 Improving the fatigue life of electro- discharge-machined SDK11 tool steel via the suppression of surface cracks Assistant : Wan-Ching Weng Department.
11-1 Space Figures and Cross Sections Objectives To recognize polyhedra and their parts To visualize cross sections of space figures.

11-1 Space Figures and Cross Sections Objectives To recognize polyhedra and their parts To visualize cross sections of space figures.
Date of download: 5/31/2016 Copyright © ASME. All rights reserved. From: Fatigue Limit Prediction of the Matrix of 17-4PH Stainless Steel Based on Small.

Date of download: 5/31/2016 Copyright © ASME. All rights reserved. From: Fatigue Limit Prediction of the Matrix of 17-4PH Stainless Steel Based on Small.
Rapid Changes to the Earth’s Surface As you watch the short video clips and look at the pictures, think about how rapid changes such as volcanoes, landslides.

Rapid Changes to the Earth’s Surface As you watch the short video clips and look at the pictures, think about how rapid changes such as volcanoes, landslides.
Date of download: 6/25/2016 Copyright © ASME. All rights reserved. From: Ultrasonic Cavitation Peening of Stainless Steel and Nickel Alloy J. Manuf. Sci.

Date of download: 6/25/2016 Copyright © ASME. All rights reserved. From: Ultrasonic Cavitation Peening of Stainless Steel and Nickel Alloy J. Manuf. Sci.
Research in Psychology 6. (Apply findings to behavior) 5. Present Findings 4. Carry out research 3. Pick a method of research 2. Choose a population and.

Research in Psychology 6. (Apply findings to behavior) 5. Present Findings 4. Carry out research 3. Pick a method of research 2. Choose a population and.
Figure 1. (a, b) Preparation design of nano-composite CAD/CAM restorations. (a) full crown and (b) mesio-occluso-distal inlay with a cusp capping; (c,

Figure 1. (a, b) Preparation design of nano-composite CAD/CAM restorations. (a) full crown and (b) mesio-occluso-distal inlay with a cusp capping; (c,

Similar presentations

Ads by Google