1. TGr Closing Report May 2007 Date: 2007-05-17 Authors: July 2005
doc.: IEEE /0805r0
May 2007
TGr Closing Report May 2007
Date:
Authors:
Notice: This document has been prepared to assist IEEE It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE
Patent Policy and Procedures: The contributor is familiar with the IEEE 802 Patent Policy and Procedures < ieee802.org/guides/bylaws/sb-bylaws.pdf>, including the statement "IEEE standards may include the known use of patent(s), including patent applications, provided the IEEE receives assurance from the patent holder or applicant with respect to patents essential for compliance with both mandatory and optional portions of the standard." Early disclosure to the Working Group of patent information that might be relevant to the standard is essential to reduce the possibility for delays in the development process and increase the likelihood that the draft publication will be approved for publication. Please notify the Chair as early as possible, in written or electronic form, if patented technology (or technology under patent application) might be incorporated into a draft standard being developed within the IEEE Working Group. If you have questions, contact the IEEE Patent Committee Administrator at
Clint Chaplin, TGr Chair
Clint Chaplin, TGr Chair

2. Abstract TGr Closing Report May 2007 July 2005
doc.: IEEE /0805r0
May 2007
Abstract
TGr Closing Report May 2007
Clint Chaplin, TGr Chair
Clint Chaplin, TGr Chair

3. LB98 Comment Resolution Results
July 2005
doc.: IEEE /0805r0
May 2007
LB98 Comment Resolution Results
334 comments from LB98
74 comments carried over from LB91 (already addressed)
195 comments carried over from LB87 (already addressed)
97 comments carried over from LB82 (already addressed)
28 comments carried over from LB79 (already addressed)
728 comments total
394 comments addressed before this meeting (54.12%)
5 comments ruled out of order (0.69%)
329 comments addressed this meeting (45.19%)
0 comments left to resolve
Clint Chaplin, TGr Chair
Clint Chaplin, TGr Chair

4. Comment Resolution Presentations
July 2005
doc.: IEEE /0805r0
May 2007
Comment Resolution Presentations
r-d5-comments.xls
r-key-holder-architecture-clean-up.doc
Clint Chaplin, TGr Chair
Clint Chaplin, TGr Chair

5. Other Presentations None July 2005 doc.: IEEE 802.11-05/0805r0
May 2007
Other Presentations
None
Clint Chaplin, TGr Chair
Clint Chaplin, TGr Chair

6. May 2007
Ad-Hoc
Ad-Hoc June 19th through June 21st, 2007, in Toronto, Canada (previously authorized in March)
Clint Chaplin, TGr Chair

7. Output Comment resolutions (11-07-0498-16-000r-d5-comments.xls)
May 2007
Output
Comment resolutions ( r-d5-comments.xls)
Motions ( r-motions ppt)
IEEE r Draft 6.0
Minutes ( r-tgr-meeting-minutes-may-2007-session.doc)
Clint Chaplin, TGr Chair

8. Result: Yes - 13; No - 0; Abstain - 1. Carries
May 2007
MOTION to amend something previously adopted: Approve the contents of r-d5-comments.xls as the comment resolutions for Letter Ballot 98.
By: Bill Marshall
Second: Jouni Malinen
Result: Yes - 13; No - 0; Abstain - 1.
Carries
Clint Chaplin, TGr Chair

9. Second: Michael Montemurro Result: Yes - 12; No - 0; Abstain - 2.
May 2007
MOTION: Moved: Having addressed all comments arising from LB98, Task Group r resolves to forward r draft 6.0 to the working group for the purpose of conducting a 15-day working group recirculation letter ballot.  The purpose of the working group recirculation letter ballot is to forward the draft to sponsor ballot. –The text of the motion to be presented to the working group will be “Move to authorize a 15-day Working Group Recirculation Letter Ballot of r draft 6.0, asking the question “Should the r draft 6.0 be forwarded to sponsor ballot?””
By: Kapil Sood
Second: Michael Montemurro
Result: Yes - 12; No - 0; Abstain - 2.
Carries
Thursday
Clint Chaplin, TGr Chair

10. Goals for July for TGr Recirculation Ballot Comment Resolutions
May 2007
Goals for July for TGr
Recirculation Ballot Comment Resolutions
Recirculation or Sponsor Ballot
Clint Chaplin, TGr Chair