1. Simple Step for FFC Fitment NFA to YFA
short FFC connector

2. Cut Cabinet Half Inch from left side of FFC connector
Fitment Solution
STEP 1
Cut Cabinet Half Inch from left side of FFC connector

3. Pull FFC slightly out and fold it Cross
STEP 2
Pull FFC slightly out and fold it Cross

4. Insert FFC connector in SMD Header Properly and screw the chassis
Step 3
Insert FFC connector in SMD Header Properly and screw the chassis

5. Now your Panel is Ready To use
Cut this Site
Now your Panel is Ready To use

6. THANK YOU