1. IK-92 PUMA

2. IK-92 Puma is a unique handy-type machine enabling both highly accurate automatic straight-line cutting and semi-automatic (manually guided / circular) cutting with one hand.

3. The IK-92 Puma is the most economical machine for cutting automatically straight lines.
For the great accuracy the machine is using a rail for guiding.
The rail (1800mm) can be extended to any desired length!! For saving weight the rail is made will holes.

4. Features IK-92PUMA Low center of gravity,
Therefore, stability is extremely high and automatic traveling can be done exactly with no need for manual holding.
Accurate and reliable drive system,
IC for speed control is equipped, thus constant and accurate machine travel is performed.
One-hand operation system making operations easier,
One hand, which holds the grip, can operate the power switch, clutch lever, speed adjustment dial and forward/reverse travel selector switch.

5. Features IK-92PUMA Bevel cutting Perfect heat prevention system,
Beveling is possible up to 45°.
Perfect heat prevention system,
Long and continuous operation is allowed due to heat insulation inside the machine body, double shield plate and a forced air cooling fan. This enhanced the durability and service life.

6. Features IK-92PUMA Secure and easily adjustable torch holder,
Contra weight for more stability,
Easy handle for switching cutting oxygen,
Travel in both forward and reverse direction,
Circle cutting option mm radius,
Plate edge roller, (cutting without rail)

7. Manual guide cutting
Let the machine run only by the drive motor (do not push or pull the machine) and give the machine only the direction by the hand. Take care that the hand actions are done smoothly.
Outside cuts (increase speed).
Inside cuts (decrease speed).
Tip.

8. Circle cutting attachment
This option provides an easy cut of a circles from mm.
Note: Make a deep punch mark on the plate.

9. Plate edge guide roller
This option make it possible to cut without rail.
The setup with the plate edge roller is different!! Take care that the IK-92 Puma has a small inclination so that the roller keep pushing against the plate edge.

10. Specifications Cutting thickness: up to 100mm
Cutting speed: 150 – 1000 mm/min
Cutting shape: I, V to 45°
Power: 42/110/220V AC
Speed regulator: Variable resistor
Weight: 8 Kg
Machine length 480mm