1. FS 309 14” Maximum Blade Capacity 9 HP Honda engine Weight – 141Lbs
Overall Dimensions:
33.5” High
38.4” Long (pointer up)
19.9” Wide

2. FS 309 Engine Mounting System
Patent pending vibration isolation system.
Engine and blade shaft are isolated from the saw frame by four strategically positioned isolators
Design strongly reduces vibration at handles
Increases production

3. FS 309 Column System Single column, construction
Raise/lower system located inside the tube
Can be easily dismounted to fit a small van or even a car
Handle can be adjusted in numerous working position

4. FS 309 Blade Shaft System
Sealed blade shaft design eliminates the need for daily greasing of blade shaft bearings
Minimum of 250 hour maintenance intervals
Isolated mounting reduces overall vibration

5. FS 309 Frame Design
Frame and engine platform design maintains operator handle and hand wheel at same position when the blade is raised or lowered
Improves stability and reduces flexing when sawing
Right rear wheel can be pulled out for increased stability

6. FS 309 Operator Handles
Operator handle design allows three dimensional adjustment for optimum operator comfort and controllability
Can be adjusted up, down, left, and right.

7. FS 309 Blade Guard
Steel blade guard with water nozzles to control flow
Front nose can be lifted
Bolt protection
Left hand cutting capacity only

8. FS 309 Water Tank Large opening for easy filling
17 Liter (4.5 Gallon) Capacity giving 17 min autonomy
Snaps on and off integrated roll cage
Quick disconnect to blade guard

9. FS 400
18” (450mm) Maximum blade capacity.
13 HP Honda engine options.

10. FS 400
Depth gauge can be adjusted for different diameter blades.

11. FS 400
Standard lift bail for easy loading and unloading.

12. FS 400
Intergraded water tank with garden hose adapter for operation with other water supply.

13. FS 400
Handles adjust to various heights for operator comfort.

14. FS 400 Screw feed handle lowers for transportation.
Gas spring assist reduces force needed to raise and lower blade in and out of cut.

15. FS 413 450mm (18”) Maximum Blade Capacity 13 HP Honda engine
Weight – 121 KG (266 Lbs)
Overall Dimensions:
1,041mm (41”) High
1,499mm (59”) Long
654mm (25-3/4”) Wide

16. FS 413 Engine Mounting System
New patent pending vibration isolation system.
Engine and blade shaft are isolated from the saw frame by four strategically positioned isolators
Design reduces vibration at handles up to 78% !!!
Contributes to increased production

17. FS 413 Power Drive System
12 groove poly “V” belt drive contributes to reduced vibration
Back side type belt tensioning is easier to adjust
Increased belt contact with sheaves assists in transferring more horsepower to the blade shaft

18. FS 413 Blade Shaft System
Sealed blade shaft design eliminates the need for daily greasing of blade shaft bearings
Minimum of 250 hour maintenance intervals
Isolated mounting reduces overall vibration

19. FS 413 Frame Design
Frame and engine platform design maintains operator console at same position when the blade is raised or lowered
Improves stability and reduces flexing when sawing

20. FS 413 Operator Console
Engine throttle and emergency off button located on console for operator convenience
New blade depth gauge is easier to adjust with increased durability
Tach/Hour meter is recessed into console to reduce possibility of damage

21. FS 413 Operator Console
Feed handle with positive lock folds down to reduce possibility of damage during transportation
Patent pending spring assist raise/lower feature reduces force needed to raise and lower saw into cut.

22. FS 413 Integrated Lift Bail
Integrated lift bail with roll cage design protects engine when transporting or lifting.
Also used as mounting platform for water tank.

23. FS 413 Water Tank Large opening for easy filling
25 Liter (6.6 Gallon) Capacity
Snaps on and off integrated roll cage
Quick disconnect to blade guard

24. FS 500 Series 18”, 20”, and 24” Blade capacity
13 Hp, 20 HP, and 24 HP Honda engine options
Weight –274 Lbs to 335 Lbs
Overall Dimensions:
42” High
66” Long
26” Wide

25. FS 500 Engine Mounting System
Patent pending vibration isolation system.
Engine and blade shaft are isolated from the saw frame by four strategically positioned isolators
Design reduces vibration at handles up to 78% !!!
Contributes to increased production

26. FS 500 Power Drive System
16 groove poly “V” belt drive contributes to reduced vibration
Back side type belt tensioning is easier to adjust
Increased belt contact with sheaves assists in transferring more horsepower to the blade shaft

27. FS 500 Blade Shaft System
Sealed blade shaft design eliminates the need for daily greasing of blade shaft bearings
Minimum of 250 hour maintenance intervals
Isolated mounting reduces overall vibration

28. FS 500 Hydrostatic Differential Drive System
Differential style drive system eliminates drive gears to wheels.
Self contained system eliminates slipping and allows for better control when sawing
Reduced maintenance

29. FS 500 Frame Design
Frame and engine platform design maintains operator console at same position when the blade is raised or lowered
Improves stability and reduces flexing when sawing

30. FS 500 Operator Console
Engine throttle and emergency off button located on console for operator convenience
New blade depth gauge is easier to adjust with increased durability
Tach/Hour meter is recessed into console to reduce possibility of damage
Feed handle with positive lock folds down to reduce possibility of damage during transportation

31. FS 500 Operator Console Key switch for starting engine
Engine throttle controls engine speed
Forward/reverse lever controls saw direction and speed
Hydrostat engage/disengage lever allows saw to be free wheeled
Patent pending spring assist raise/lower feature reduces force needed to raise and lower saw into cut.

32. FS 500 Blade Guard
Cast aluminum blade guard with integrated handle for easier transportation
Slip on style with locking bolt is easier to remove
Steel bushings and bearings strengthens front nose hinge assembly which reduces excessive noise and vibration
Water feed system is simple and easily serviced

33. FS 500 Integrated Lift Bail
Integrated lift bail with roll cage design protects engine when transporting or lifting.
Also used as mounting platform for water tank.

34. FS 500 Water Tank Large opening for easy filling
25 Liter (6.6 Gallon) capacity
Snaps on and off integrated roll cage
Quick disconnect to blade guard