1. 2.01 Understand safety procedures
Environmental Safety 4
2.01 Understand safety procedures

2. Read Policy and Procedure Manual
General Guidelines
Read Policy and Procedure Manual
2.01 Understand safety procedures
2.01 Understand safety procedures

3. Always get training before operating equipment
General Guidelines
Always get training before operating equipment
2.01 Understand safety procedures
2.01 Understand safety procedures

4. Use electrical equipment in a dry area, free from water
General Guidelines
Use electrical equipment in a dry area, free from water
2.01 Understand safety procedures
2.01 Understand safety procedures

5. Observe all safety precautions
General Guidelines
Observe all safety precautions
2.01 Understand safety procedures
2.01 Understand safety procedures

6. Keep area clean and neat
General Guidelines
Keep area clean and neat
Louisburg
Overhills
Hobbton
2.01 Understand safety procedures
2.01 Understand safety procedures

7. Frequently check for safety hazards in patient and visitor areas
General Guidelines
Frequently check for safety hazards in patient and visitor areas
2.01 Understand safety procedures
2.01 Understand safety procedures

8. Report unsafe situations
General Guidelines
Report unsafe situations
2.01 Understand safety procedures
2.01 Understand safety procedures

9. Environmental Safety Hazardous Materials
Employer must inform employee of chemicals or other hazards in the workplace
2.01 Understand safety procedures
2.01 Understand safety procedures

10. Environmental Safety Hazardous Materials
Handling Liquids
Read label at least 3 times
Never mix solutions
Store solutions in a
locked cabinet
2.01 Understand safety procedures
2.01 Understand safety procedures

11. Environmental Safety Hazardous Materials Safety Signs and Symbols
Materials marked with this symbol may be contaminated or contain infectious pathogens
2.01 Understand safety procedures
2.01 Understand safety procedures

12. Hazardous Materials Safety Signs and Symbols
found near radiation tx areas or x-ray facilities
2.01 Understand safety procedures
2.01 Understand safety procedures

13. Hazardous Materials Safety Signs and Symbols
used on damaged or dangerous equipment
2.01 Understand safety procedures
2.01 Understand safety procedures

14. Hazardous Materials Safety Signs and Symbols
indicates area in which compressed oxygen is being used. No smoking or open flames should be present in these areas.
2.01 Understand safety procedures
2.01 Understand safety procedures

15. Hazardous Materials Safety Signs and Symbols
indicates which type of personal protective equipment must be worn before entering a specific area. Can also indicate specific safety hazards
2.01 Understand safety procedures
2.01 Understand safety procedures

16. Hazardous Materials Safety Signs and Symbols
Sign placed in areas that are highly contaminated and should only be entered by trained individuals who are wearing the proper protective equipment
2.01 Understand safety procedures
2.01 Understand safety procedures

17. Hazardous Materials Material Safety Data Sheets
Required by Occupational Safety and Health Administration (OSHA)
Must have a Material Safety Data Sheet (MSDS) for every liquid in the facility
2.01 Understand safety procedures
2.01 Understand safety procedures

18. Environmental Safety Hazardous Materials Material Safety Data Sheets
Product Information
Precautions
Instructions for use
Clean up procedure
Disposal
Emergency Care if injured
2.01 Understand safety procedures
2.01 Understand safety procedures