1. ©2016 Power Sensors Ltd. www.PQube3.com
PQube® 3 Standard Pre-Wired Packages for quick and easy installation
PQube 3-in-a-Box
PQ3iaB-Rugged
- Wall-mount – Indoor/Outdoor package for wall mounting applications
- Pole-mount – Indoor/Outdoor package for pole mounting applications
PQ3iaB-Portable
- Portable indoor package with pluggable connections for shorter
term monitoring
PQube 3 Rack Mount
- Single-phase rack-mount packages for data centers and substations
©2016 Power Sensors Ltd.

2. ©2016 Power Sensors Ltd. www.PQube3.com
PQ3iaB–Rugged-Wall-Mount
Indoor/Outdoor Wall-mount package
PQube 3 Power Analyzer, pre-packaged in an IP44 rated rugged polycarbonate indoor/outdoor wall-mount enclosure
Hinged window for color touchscreen display viewing or access
Quick connect terminal blocks for easy field wiring
Voltage measurement range 100~480Vac
Eight current channels - 333mV or ±10V peak
Relay output, analog and digital inputs
PQube 3 powered from measured voltage, and comes with 1-hour battery backup
Just drill holes for your conduit or cable glands, connect wiring, and you're ready to go
Internal enclosure temperature rating: -20 to +60°C
©2016 Power Sensors Ltd.

3. ©2016 Power Sensors Ltd. www.PQube3.com
PQ3iaB–Rugged-Pole-Mount
Outdoor Pole-mount package
Essentially the same package as the rugged wall-mount
Comes with stainless-steel pole mount brackets and straps
No viewing window on enclosure
©2016 Power Sensors Ltd.

4. ©2016 Power Sensors Ltd. www.PQube3.com
PQ3iaB–Portable
Portable Indoor Package
PQube 3 Power Analyzer pre-packaged and pre-wired in an indoor polycarbonate enclosure with hinged window and handle.
Pluggable connections for easy field wiring.
Voltage measurement range 100~480Vac
Eight current channels – 333mV or ±10V peak
Relay output, analog and digital inputs
PQube 3 powered from measured voltage (360~480Vac), or 24Vdc input plug ( Vac:24Vdc power supply provided).
30-minute internal battery backup for PQube 3
Fused voltage cables with alligator clips included
Internal enclosure temperature rating: -20 to +50°C
©2016 Power Sensors Ltd.

5. ©2016 Power Sensors Ltd. www.PQube3.com
PQ3iaB– Accessories
Remote Antenna Mounting Bracket
This anodized-aluminum bracket lets you mount your Precision GPS Receiver and your 4G Cell Modem antennas almost anywhere.
It comes with stainless-steel screws and washers for mounting to any wall.
Also included is a stainless-steel strap for poles from 2 to 3.5 inches (5 to 9cm) diameter.
Mounting on a bigger pole? Order the optional pole-mount PMB-SS-00, and you'll get a special stainless-steel sharp-toothed adapter, and a stainless-steel strap for poles up to 14 inches (36cm) diameter
Antenna and GPS Receiver cables
Indoor and outdoor rated cables for remote mounting your cellular antennas and GPS receivers
©2016 Power Sensors Ltd.

6. ©2016 Power Sensors Ltd. www.PQube3.com
PQube 3 Rack-Mount packages
Single-Phase Rack-Mount package
A good choice for data centers and substations. PSL can supply single-phase rack mounts with plug-in connectors for pairs of PQube 3’s (DSSP), or just a single PQube 3 (SSSP).
©2016 Power Sensors Ltd.