1. Model Hook 050-003-115 H Y J Revision : A Client : Slider qty : 2
Sagem GSM DESK PHONE
Lifter qty :
Part name :
Hook
Gate type :
side
Part no.. :
Cavities :
1+1+1
DFM by :
H Y J
2/3 Plate :

2. DFM follow-up issue. Integral Corrective Action List
ICAL
ICAL
1 - Date of opening (all dates in 2005)
2 - Date of beginning of action
3.- Date foreseen for validation
DFM follow-up issue Integral Corrective Action List
4 – Date of validation (closing)
Page
Open points
Solutions / Action
Who 1 2 3 4
P.3
Gate (mold flow)
Waiting for confirmation.
P.4
Parting line
P.5
Slider
P.6
Suggestion (thick plastic)
Waiting for confirmation
P.7
Draft angle
P.8
P.9
P.10
P.11
P.12
P.13
P.14
P.15
P.16
P.17

3. Gate (mold flow)
Side gate

4. Parting line
Cavity
Care

5. Slider
Slide_2
Slide_1

6. Suggestion (thick plastic)
The element is too thick, and it will cause sink mark & air bubble.

7. 1.The yellow color surface
Draft angle
1.The yellow color surface
No draft angle
2. Where need texture? Please add enough draft angle for the texture.
3. For the ribs, side surface in the cavity/ core and sliders, we will make a draft angle less than 2 degree (reduce plastic).
But we will keep the tolerance.