1. Supervision and Monitoring
In the Primary Section
And
Monitoring &
Assessing School Internship
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

2. SCHOOL SUPERVISION POLICY OF KENDRIYA VIDYALAYAS
REFERENCES
SCHOOL SUPERVISION
POLICY OF
KENDRIYA VIDYALAYAS
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

3. Supervision is primarily carried out to assess the quality and / or performance.
It also aims to identify the strong and weak areas so as to facilitate their effective functioning.
NCF 2005 says that it is a process that enables and provides constructive feedback in relation to the teaching and learning process with in specific classroom contexts.
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

4. PROCESSES WHICH ARE TO BE
MONITORED
Targets
b) Efforts
c) Key result areas
d) Major achievements
e) Major deficiencies
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

5. AREAS WHICH ARE TO BE MONITORED AS HMs Academic
Various Efforts by Teachers and Students
Facilities and Amenities in the School
Achievement,
Recognition and feedback from various stakeholders.
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

6. FOCUS AREA FOR SUPERVISION- The Teaching-learning Process
KEY MESSAGES
Supervision is not only class Observation
It is a monitoring of the complete holistic learning
Environment of the school,
3.It is an on going process which assesses
the strengths and weaknesses of all aspects of the
Primary
4.It also scrutinises the Processes
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.
FOCUS AREA FOR SUPERVISION-
The Teaching-learning Process

7. ROLE OF THE HM AS A SUPERVISOR
EDUCATIONAL LEADER- Discusses and leads sound pedagogical practices
FACILITATOR- facilitates to optimise the strengths of the Teacher
GUIDE- shows the direction for progress and improvement
EFFECTIVE COMMUNICATOR- uses appropriate means of dialogue and conversation
MEDIATOR- helps establish collaboration between teachers to promote progress and Quality
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

8. HOW TO SUPERVISE To begin with:
Set in pre-observation mechanisms- discuss the class with the teacher before and after the class
Note specific ,constructive remarks, focussing on the professional strengths of the teacher
Facilitate through multiple means the skills to be developed in the teacher
Write specific remarks- not just “YES” / “NO”
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

9. WHAT TO LOOK FOR IN CLASS SUPERVISION
Whether is teacher is clear about what is to be taught in the thirty minutes
begins with prior knowledge of the students and connects it to the daily life
Involves all children through Group Work facilitated by COST EFFECTIVE TLMs
Uses BlackBoard and other aids
Summarizes the learning points in a Lesson
SKILLS OF A TEACHER
Communicates effectively
is child friendly and shows good rapport and facilitates peer interactions
Maintains necessary documentation
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

10. cce marks posted on www.kvsangathan.nic.in
MONITORING TOOLS
SOURCE-
cce marks posted on
PERFORMANCE
PORTFOLIO
CLASS OBSERVATION
Animated floating bubbles
(Intermediate)
To reproduce the bubble shape effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout, and then click Blank.
Select the circle (oval shape). On the Home tab, in the Drawing group, click the Format Shape dialog box launcher. In the Format Shape dialog box in the left pane, click Fill. In the Fill pane, click Gradient fill, and then do the following:
On the Home tab, in the Drawing group, click Shapes, and then under Basic Shapes select Oval (second option from the left). Press and hold SHIFT, and then click and drag to draw a circle shape.
Click the button next to Direction and select From Bottom Right Corner (first option from the left).
In the Type box, select Radial.
Click the button next to Preset Colors and select Calm Water (second row, third option from the left).
Also in the Format Shape pane, in the left pane, click Line Color. In the Line Color pane, click Gradient Line, and then do the following:
In the Angle box, enter 90.
In the Type box select Linear.
Also in the Format Shape pane, in the left pane, click 3-D Format and then in the 3-D Format pane, do the following:
Next to Top, in the Width box, enter 50 pt, and in the Height box, enter 50 pt.
Under Bevel, click the button next to Top and select Circle (first option from the left).
In the Angle box, enter 110°.
Click the button next to Lighting, and then under Special, select Glow (third option from the left).
Under Surface, click the button next to Material, and then under Translucent, select Clear.
To reproduce the animation effects on this slide, do the following:
On the Animations tab, in the Timing group, in the Start list, select With Previous.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Entrance click Appear.
On the Animations tab, in the Advanced Animation group, click Add Animation, and then click More Motion Paths. In the Add Motion Path dialog box, under Lines & Curves, click S Curve 1, and then click OK.
On the slide, select the animation path. Click and drag the green rotation handle to the right to rotate the path until the right side of the path faces the bottom right corner of the slide. Click and drag the right side handle to lengthen the path until it extends about one inch off the bottom right edge of the slide. Click and drag the left side handle to lengthen the path until it extends about one inch off the top left edge of the slide.
On the Animations tab, in the Timing group, in the Duration box, enter 8.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Emphasis click Grow/Shrink.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path a smooth S-shaped curve from the bottom right to top left.
On the Animations tab, in the Animation group, click Effect Options, and then click Reverse Path Direction.
On the Animations tab, in the Animation group, click Effect Options, and then click Larger.
On the Animations tab, in the Timing group, in the Delay box, enter 6.
On the Animations tab, in the Timing group, in the Duration box, enter 0.1.
On the slide select the oval. On the Animations tab, in the Advanced Animation group, click Add Animation, and then under Exit click Fade.
To create the second bubble on this slide, do the following:
Select the bubble. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate.
On the Animation tab, in the Advanced Animation group, click Animation Pane.
Drag the bubble to a different part of the slide.
Select the new bubble. Press and hold SHIFT, and then drag the sizing handle to resize the shape.
In the Animation Pane, select the S Curve 1 effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
In the Animation Pane, select the Appear effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 1.4.
On the Animations tab, in the Animation group, click Effect Options, and then click Edit Points. Click and drag the edit points and curve handles to make the path of the second oval different from the first one.
In the Animation Pane, select the Fade effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
In the Animation Pane, select the Grow/Shrink effect for the second oval. On the Animations tab, in the Timing group, in the Delay box, enter 7.
Note: You can save the background of this slide template as a picture and use it in your own slides. To use the same background as this slide, do the following:
To reproduce the background on this slide, do one of the following:
Save the file as a JPEG (.jpg) file format.
Right-click the water background on the original template, and then click Save Background.
In the Insert Picture dialog box, select a picture, and then click Insert.
On the Design tab, in the Background group, click Background Styles, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Picture fill in the Fill pane, and then under Insert from click File.

11. SCHOOL INTERNSHIP
ZIET MYSORE IS CONDUCTING A 6 MONTH SPECIAL IN-SERVICE TRAINING FOR PRTs WITH B.Ed qualification who have joined as PRTs w.e.f Sept. 2001
Training Period July – December
Modes- Distance and PCP- personal Contact programme
Distance Mode will have weekly online assignments and 3 PCPs will be held at ZIET
The trainees are to be monitored in the School in all aspects and evidence of their work compiled and sent to ZIETs by the HMs. A Monitoring tool will be sent with instructions for facilitating the same.