Download presentation
Presentation is loading. Please wait.
Published byMary Bailey Modified over 5 years ago
1
2019/4/26 Client: Dell Gate type : Side gate Model: DOZER Tool type: 2 Plate Material: Cavities: Part Name.: MC192 DFM by: Alan Huang
2
I C A L I C A L DFME follow-up issue. Page. OPEN POINTS
1 - Date of opening (all dates in 2005) 2 - Date of beginning of action I C A L 3 - Date foreseen for validation DFME follow-up issue. Integral Corrective Action List 4 - Date of validation (closing) Page. OPEN POINTS SOLUTIONS / ACTION WHO 1 2 3 4 P.2 GATE Awaiting for confirmation. 07/09 P.3 WELD LINE P.4 PARTING LINE P.5 P.6 LIFTER P.7 EJECTOR PIN P.8 SUGGESTION P.9,10,11
3
GATE Sub gate
4
WELD LINE Weld line
5
PARTING LINE Dell Accept CAVITY CORE
6
PARTING LINE Dell Accept CAVITY CORE
7
LIFTER Dell Accept Lifter
8
EJECTOR PIN Ejector pin Dell Accept
9
Dell Accept – Will double the width of flex relief cut-out.
SUGGESTION Thin steel (8X) Dell Accept – Will double the width of flex relief cut-out.
10
Dell Accept – Latest model is already drafted
SUGGESTION Dell Accept – Latest model is already drafted The yellow surface have not draft angle . Suggest to reduce plastics for mold released .
11
suggestion These two holes are undercut ,please see the next page for details.
12
Dell Accept – Will revise model to eliminate undercuts.
suggestion Dell Accept – Will revise model to eliminate undercuts. Mold work direction Undercut(2X) Mold work direction Suggest to change like this
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.