Presentation is loading. Please wait.

Presentation is loading. Please wait.

Types of Corrosion Dr. Swati Kolet Assistant Professor

Published byHoratio Lewis McCormick Modified over 5 years ago

Similar presentations

Presentation on theme: "Types of Corrosion Dr. Swati Kolet Assistant Professor"— Presentation transcript:

1 Types of Corrosion Dr. Swati Kolet Assistant Professor
Department of Applied Sciences & Engineering Hope Foundation’s International Institute of Information Technology, Pune

2 MIDC Phase 1, Hinjawadi, Pune – 411057
Dry Corrosion This type of corrosion occurs due to direct attack of atmospheric gases. Rate of corrosion depends on: Chemical affinity between metal and gas Temperature Nature of oxide film on the surface of metal Moisture in air Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

3 Mechanism of Dry Corrosion
Corrosion by oxygen: The corrosion of metal by oxygen takes place as: Adsorption of O2 molecules on metal surface Dissociation of O2 molecules into atoms Loss of electrons by metal atom to Oxygen atom, resulting in formation of metal ion and oxide ion. Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

4 MIDC Phase 1, Hinjawadi, Pune – 411057
Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

5 MIDC Phase 1, Hinjawadi, Pune – 411057
Nature of oxide film Porous film 4Na + O Na2O 2Fe + O FeO 2Mg + O MgO Non-porous film 2Al+ 3/2O Al2O3 Unstable oxide film 4Ag+ O2 → 2Ag2O Volatile oxide film 2Mo+ 3O2 → 2Mo2O3 Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

6 MIDC Phase 1, Hinjawadi, Pune – 411057
Pilling Bedworth Rule This gives idea about nature of oxide film. PBR = Volume of metal oxide/ Volume of metal consumed If 1 < PBR< 1.45 then film is non porous. Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

7 MIDC Phase 1, Hinjawadi, Pune – 411057
Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

8 Electrochemical Corrosion (Immersed corrosion)
Definition: Corrosion of a metal by aqueous conducting medium with the formation of anodic and cathodic areas. There are two types of electrochemical corrosion: Galvanic Corrosion Concentration/Differential Aeration Note: Corrosion takes place only on the anodic area and the product remains dissolved or gets deposited on the cathode. Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

9 MIDC Phase 1, Hinjawadi, Pune – 411057
1. Galvanic Corrosion Definition: The electrochemical corrosion by attack of an aqueous medium with the formation of a galvanic cell is called galvanic corrosion. There are three types: Two dissimilar metals in contact Stressed and unstressed part on the same metal Impurities in the metal Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

10 Two dissimilar metals in contact
Metals or alloys that are placed higher in the galvanic series act as anode and get corroded. Ex: Tap of brass or stainless steel pipe. Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

11 Stressed and Unstressed part on same metal
Stressed part: Working on a metal part disturbs the grain structure at the worked part i.e. stressed part. Whenever it comes in contact with aqueous medium stresses part acts as anode and unstressed part acts as cathode. Ex: Threaded end of a pipe or tip of a pin. Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

12 MIDC Phase 1, Hinjawadi, Pune – 411057
Impurities in metal A large number of tiny galvanic cells are formed on the surface of the metal or improperly made alloy when in contact with aqueous medium. Here, either the impurity or the metal acts as anode depending on the placement in the galvanic series. Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

13 2. Concentration/Differential Aeration
Definition: The concentration of cells formed due to varying O2 concentrations on a metal are called as differential aeration cells and the corrosion is called Differential Aeration corrosion. There are four types: Partial immersion of metal Partial burial in ground Crevices Oxide film on metal surface partially ruptured Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

14 Partial immersion of metal
The immersed part of the metal is poorly oxygenated and the upper part that is exposed to higher concentration of air acts as cathode and does not get corroded. Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

15 MIDC Phase 1, Hinjawadi, Pune – 411057
Partial burial in ground A metal partially buried in ground has the aerial part more oxygenated(cathode) and moist part poorly oxygenated(anode). Crevices Two metals in contact have a crevice which is poorly oxygenated and gets corroded. Oxide film on metal surface partially ruptured When the non-porous oxide film is ruptured, open part is oxygenated and covered part is poorly oxygenated. Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

16 Mechanism of Electrochemical Corrosion
Whether the electrochemical cells take place by galvanic cells formation or concentration cells formation ,the mechanism of corrosion is same. Reaction on anode : M → M+n + ne- Fe → Fe2+ + 2e- (1)H2 liberation (2)O2 adsorption Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

17 MIDC Phase 1, Hinjawadi, Pune – 411057
(1)H2 liberation If the corroding ,then the H+ ions from the medium catch electrons from the cathode and liberate H2 Cathode: 2H+ + 2e- → 2H → H2 ↑ Fe + 2H+ → Fe2+ +H2 Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

18 MIDC Phase 1, Hinjawadi, Pune – 411057
(2)O2 adsorption If the corroding medium is neutral or bit alkaline than some oxygen gas dissolved gets adsorbed on the cathode Cathode: O2 +2H2O → 4OH- Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 | |

19 For further details, please contact Dr. Swati Kolet
THANK YOU For further details, please contact Dr. Swati Kolet Department of Applied Sciences & Engineering Hope Foundation’s International Institute of Information Technology, I²IT P-14,Rajiv Gandhi Infotech Park MIDC Phase 1, Hinjawadi, Pune – Tel /2/3 |

Download ppt "Types of Corrosion Dr. Swati Kolet Assistant Professor"

Similar presentations

Department of Chemistry

Department of Chemistry
Chemical vs. Electrochemical Reactions  Chemical reactions are those in which elements are added or removed from a chemical species.  Electrochemical.

Chemical vs. Electrochemical Reactions  Chemical reactions are those in which elements are added or removed from a chemical species.  Electrochemical.
Fuel cells differ from batteries in that the former do not store chemical energy. Reactants must be constantly resupplied and products must be constantly.

Fuel cells differ from batteries in that the former do not store chemical energy. Reactants must be constantly resupplied and products must be constantly.
Surface Technology Part 4 Corrosion

Surface Technology Part 4 Corrosion
ISSUES TO ADDRESS... Why does corrosion occur ? 1 What metals are most likely to corrode? How do temperature and environment affect corrosion rate? How.

ISSUES TO ADDRESS... Why does corrosion occur ? 1 What metals are most likely to corrode? How do temperature and environment affect corrosion rate? How.
CHAPTER 4 CORROSION AND ITS PREVENTION

CHAPTER 4 CORROSION AND ITS PREVENTION
Lesson 2. Galvanic Cells In the reaction between Zn and CuSO 4, the zinc is oxidized by copper (II) ions. Zn 0 (s) + Cu 2+ (aq) + SO 4 2-  Cu 0 (s) +

Lesson 2. Galvanic Cells In the reaction between Zn and CuSO 4, the zinc is oxidized by copper (II) ions. Zn 0 (s) + Cu 2+ (aq) + SO 4 2-  Cu 0 (s) +
Corrosion & Associated Degradation

Corrosion & Associated Degradation
Batteries and Fuel Cells

Batteries and Fuel Cells
Physical Science Applications in Agriculture Unit Physical Science Systems.

Physical Science Applications in Agriculture Unit Physical Science Systems.
Uniform or general corrosion is typified by the rusting of steel Uniform or general corrosion is typified by the rusting of steel.  Other examples.

Uniform or general corrosion is typified by the rusting of steel Uniform or general corrosion is typified by the rusting of steel.  Other examples.
Chapter 17 - 1 ISSUES TO ADDRESS... Why does corrosion occur ? What metals are most likely to corrode? How do temperature and environment affect corrosion.

Chapter ISSUES TO ADDRESS... Why does corrosion occur ? What metals are most likely to corrode? How do temperature and environment affect corrosion.
Properties of Materials & Corrosion Eng. Shadi Sawalha.

Properties of Materials & Corrosion Eng. Shadi Sawalha.
Types of corrosion Dr. Syed Hassan Javed.

Types of corrosion Dr. Syed Hassan Javed.
CHAPTER 17: CORROSION AND DEGRADATION

CHAPTER 17: CORROSION AND DEGRADATION
Corrosion Mechanisms Lecture#02.

Corrosion Mechanisms Lecture#02.
Corrosion is the unwanted oxidation of a metal.. Oxidation of all Metals in general is called corrosion Oxidation of All Metals is called Corrosion.

Corrosion is the unwanted oxidation of a metal.. Oxidation of all Metals in general is called corrosion Oxidation of All Metals is called Corrosion.
Shipwrecks, Corrosion and Conservation

Shipwrecks, Corrosion and Conservation
Chapter 17 Corrosion and Degradation of Materials.

Chapter 17 Corrosion and Degradation of Materials.
TARNISH & CORROSION By Head of Department Dr. Rashid Hassan Assistant Professor Science of Dental Materials Department DENTAL SECTION (W.M.D.C) ABBOTTABAD.

TARNISH & CORROSION By Head of Department Dr. Rashid Hassan Assistant Professor Science of Dental Materials Department DENTAL SECTION (W.M.D.C) ABBOTTABAD.

Similar presentations

Ads by Google