1. Multi-Gear Tire Lock

2. Outline
Background
Product Introduction
Installment

3. Background
Tires are one of the most important component for vehicle. In the recent years, because the cost of material raised up rapidly and the tires can easily be stolen and resold, the rate of losing tires becomes higher and higher.
With the above condition, DEFEND GROUP develops a brand new product, which can prevent thieves stealing the tires from the cars.

4. Product introduction
Use the combination of gears, which is hard for thieves to decipher
The structure with over 32 combination ways
After installing, there will be 2 parts
Lock body  Tighten-up on the tires
Gear-key  The lock body can’t be unlocked without the gear-key

5. Product introduction Spec. of Tire Lock Features Specification Unit
Material
Stainless Steel 420J2
none
Volume
57.11
cm³
Pitch
M12x1.5 mm
Total length of bolt
34.6
Diameter 30
Permutation of gears
Over 32Ways

6. Product introduction
Tire Lock Diagram
Lock Body
Gear-Key

7. Installment
1. Use the socket wrench to slacken the original nut

8. Installment
2. Roll in the lock body

9. Installment
3. Use the gear-key and 21mm socket wrench to tight up the lock body

10. Installment
4.Use gear-key (bottom) to tight up the dust cover

11. Installment
5. Done

12. Thanks for your attention