1. TOLERANCE DESIGN AND TOLERANCING
LECTURE 11
TOLERANCE DESIGN AND TOLERANCING

2. Tolerance Design and Tolerancing

3. Functional Limits and the Societal Loss

4. Functional Limits and the Societal Loss (Cont.)

5. Functional Limits and the Societal Loss (Cont.)

6. Functional Limits and the Societal Loss (Cont.)

7. Functional Limits and the Societal Loss (Cont.)

8. Determinations of Tolerances

9. Tolerance Design for the Nominal-the-Best (N Type)

10. Tolerance Design for the Nominal-the-Best (N Type) (Cont.)

11. Tolerance Design for the Nominal-the-Best (N Type) (Cont.)

12. Tolerance Design for the Nominal-the-Best (N Type) (Cont.)

13. Tolerance Design for the Nominal-the-Best (N Type) (Cont.)

14. Tolerance Design for the Nominal-the-Best (N Type) (Cont.)

15. Tolerance Design for the Nominal-the-Best (N Type) (Cont.)

16. Tolerance Design for the Larger-the-Better Characteristics (L Type)

17. Tolerance Design for the Larger-the-Better Characteristics (L Type) (Cont.)

18. Tolerance Design for the Larger-the-Better Characteristics (L Type) (Cont.)

19. Tolerance Design for the Larger-the-Better Characteristics (L Type) (Cont.)

20. Tolerance Design for the Smaller-the-Better Characteristics (S Type)

21. Tolerance Design for the Smaller-the-Better Characteristics (S Type) (Cont.)
Compare the quality levels of the two machines, based on 20 units produced by each machine under the same conditions of control, with the roundness measured in µm. The measurements are given in Table 3.2.

22. Tolerance Design for the Smaller-the-Better Characteristics (S Type) (Cont.)

23. Tolerance Design for the Smaller-the-Better Characteristics (S Type) (Cont.)

24. Tolerance Design for the Smaller-the-Better Characteristics (S Type) (Cont.)

25. Tolerance Design for the Smaller-the-Better Characteristics (S Type) (Cont.)

26. Tolerance Design for the Smaller-the-Better Characteristics (S Type) (Cont.)

27. Tolerance Design for the Smaller-the-Better Characteristics (S Type) (Cont.)

28. Tolerance Design for the Smaller-the-Better Characteristics (S Type) (Cont.)

29. Tolerance Allocation for Multiple Components

30. Tolerance Allocation for Multiple Components (Cont.)

31. Tolerance Allocation for Multiple Components (Cont.)

32. Tolerance Allocation for Multiple Components (Cont.)

33. Tolerance Allocation for Multiple Components (Cont.)

34. Tolerance Allocation for Multiple Components (Cont.)

35. Tolerance Allocation for Multiple Components (Cont.)

36. Tolerance Allocation for Multiple Components (Cont.)

37. Tolerance Allocation for Multiple Components (Cont.)

38. Tolerance Allocation for Multiple Components (Cont.)

39. Tolerance Allocation for Multiple Components (Cont.)

40. Tolerance Allocation for Multiple Components (Cont.)

41. Tolerance Allocation for Multiple Components (Cont.)

42. Nonlinear Tolerancing

43. Nonlinear Tolerancing (Cont.)

44. Nonlinear Tolerancing (Cont.)