1. 2nd pass: 515 nm filter, 14 J/cm2, 10 ms, 20 °C
BEFORE / AFTER | Three months post 3 tx | courtesy of Shiho Tanaka, MD BBL™ 1st pass: 590 nm filter, 11 J/cm2, 20 ms, 15 °C
2nd pass: 515 nm filter, 14 J/cm2, 10 ms, 20 °C
© 2012 Sciton, Inc. All rights reserved Rev. A B&A BBL

2. 2nd pass: ST, 45 J/cm2, 6 Hz, 20 ºC cooling, static technique
BEFORE / AFTER | Three months post 5 tx | courtesy of Teresa Mann, MD SkinTyte™ 1st pass: 695, 16 J/cm2, 15 ms, 20 ºC cooling
2nd pass: ST, 45 J/cm2, 6 Hz, 20 ºC cooling, static technique
© 2014 Sciton, Inc. All rights reserved Rev. B B&A ST

3. BEFORE / AFTER | 1 tx | courtesy of Catherine Fisher, MD BBL™ Parameters: 515 nm filter, 12 J, 15 ms, 15 °C cooling
© 2010 Sciton, Inc. All rights reserved Rev. B B&A BBL

4. BEFORE / AFTER | Four months post 10 tx | courtesy of Richard Sturm, MD SkinTyte™ Parameters: 35 fluence, 5 s, 2 s post cooling
© 2009 Sciton, Inc. All rights reserved Rev. A B&A ST

5. BEFORE / AFTER | 1 tx | courtesy of Gloria Lopez, MD SkinTyte™
© 2009 Sciton, Inc. All rights reserved Rev. A B&A ST

6. BEFORE / AFTER | 1 tx | courtesy of Gloria Lopez, MD SkinTyte™6
© 2009 Sciton, Inc. All rights reserved Rev. A B&A ST

7. BEFORE / AFTER | One month post 1 tx | courtesy of Marie DiLauro, MD SkinTyte™ Parameters: 150 J, 15 s, 30 °C cooling
© 2009 Sciton, Inc. All rights reserved Rev. A B&A ST

8. BEFORE / AFTER | 15 months post 4 tx | courtesy of Elizabeth Hagberg, MD SkinTyte™ Parameters: 40 J, s, 15 °C
© 2010 Sciton, Inc. All rights reserved Rev. B B&A ST

9. BEFORE / AFTER | Seven weeks post 3 tx | courtesy of Jody Levine, MD SkinTyte™ 1st Treatment: 590ST Filter 7 W/cm2, 11 s, 30 ºC 2nd Treatment: 590ST Filter 11 W/cm2, 11 s, 30 ºC 3rd Treatment: 590ST Filter 12 W/cm2, 11 s, 30 ºC
© 2011 Sciton, Inc. All rights reserved Rev. B B&A ST

10. BEFORE / AFTER | Four months post 3 tx | courtesy of Kei Negishi, MD SkinTyte™ Parameters: 150 J/cm2, s, ºC
© 2012 Sciton, Inc. All rights reserved Rev. B B&A ST

11. BEFORE / AFTER | Two months post 3 tx | courtesy of Sara Molsbee, RN SkinTyte™ Parameters: 150 J/cm2, ms, 30 ºC cooling
© 2013 Sciton, Inc. All rights reserved Rev. A B&A ST