1. Assembling the new bearing

2. ↑
1, removingΦ62 ring-Circlip, and take out the bearing following the attached process of removing bear) ↑

3. 2, Put the o-ring and plastic cover on↓
2, Put the o-ring and plastic cover on ↓

4. ↓ ↓

5. ↓ ↓
4, put the bearing until to the position of still can showing the circlip’s groove. Pls refer to the above picutre.

6. ↓
5，put the washer on the bearing, and insert the Φ30 circlip into groove for fixing the bearing

7. ↓
6，fix the Φ62 circlip on

8. 7，fix the plastic cover，O-ring is pressed on the plastic cover.