1. R200 and ATS100
Presentation
01/12/2013

2. Easergy R200 and ATS100 Control and Monitoring distributed system
All the power and experience of Easergy range now inside Premset

3. The new generation of switchgear technology
Premset: a disruptive technological breakthrough opening to a new generation of switchgear - Efficiency
Smart grid and advanced management solutions across the network
Intelligent, smart grid-ready solutions:
- Feeder automation
- Load management
- Asset management
- Automatic Transfer System
Architecture with distributed intelligence
Premset
The new generation of switchgear technology
The new generation of switchgear technology also means embedding the smart devices directly inside the switchgear
Schneider Electric UK Medium Voltage Activity
10/02 Product Marketing

4. R200 and ATS100 System

5. Premset Control & Monitoring

6. Embedded intelligence in switchgear
Local SCADA
DMS
LAN
WAN
Ethernet
Modbus IP, IEC , DNP3 IP
RTU, ATS
Power Supply
Modbus Serial and IP
IEC /104
DNP3 Serial and IP
PSTN
RS232/485
Radio (FFSK)
GSM / GPRS 3G
R200 or ATS100
PS100
Modbus RS485
SC110
Flair 23DM
PM800
VIP410
Energy Quality
Monitoring
Switch Controller
FPI & Voltage presence
Self powered
Protection

7. System functional summary
Controls and monitors MV switchgears: SC1x0 (up to 29)
Detects the passage of fault currents: Flair 2xD: All earthing systems
Detects Voltage presence/absence: VD23: Highly configurable
Measures: Current, voltage, power, energy, .... : PM
Protection relays : VIP or SEPAM
Automated network reconfiguration: ATS 100: ACO or BTA
Supplied by a High availability Power Supply and battery: PS100
Configuration and Diagnostic tool through Web server
Communicates to DMS and/or local SCADA
Can integrate other Modbus slaves
NEW!

8. Embedded intelligence in switchgear
Functional approach based on optional and independent modules to cover various combination and offer just enough architecture
Remote Communication:R200 or
Source transfer: ATS100
Modules fully integrated in functional unit
Including sensors, switchgear interface, power supply, communication, HMI
Pre- engineered, factory-tested, cost effective
Easy integration based on :
Field bus communication between modules
Pre-cabling inside cublicle
Other Modbus slave devices can be integrated: Sepam 80, PM, Ion meters, etc...
Modbus
Power supply : PS100
Fault passage indication : Flair 23DM
Protection : VIP410, Sepam 20 or Sepam 40
Switchgear Control : SC110A or SC100E
Voltage detection : VD 23
Power Monitoring : PM 800

9. Catalogue R200/ATS100 system Stand alone R200 ATS100 SC1x0 Flair 2xD
6 references, according to communication medium
R200
Remote com.
Remote com. + Source transfer
6 refs: ACO or Bus Tie, and no modem, GPRS or 3G
ATS100
SC1x0
Local/remote control
SC100A: Vdc
SC100E: Vdc Vac
SC110A: Vdc
SC110E: Vdc Vac
Flair 21D: Supercap
Flair 22D: Li battery
Flair 23D: Ext Vdc
Flair 23DM: FPI + Voltage relay + Modbus communication
Flair 2xD
Fault passage indicator
Voltage detection relay
VD23
Voltage detection relay
VD23
Flair 23DM: FPI +
VIP410A
VIP410E
Self powered
protection relay
VIP400
VIP40/45
VIP 4
PS100 24VDC
PS100 48VDC
PS100
Power supply
Sepam
Auxilliary powered
protection relay
Sepam 20, 40, 60, 80 PM
Energy Monitoring
PM800

10. Easergy R200/ATS100 Common Functions

11. Substation Monitoring
Data acquisition from local devices
Fault detection: Flair
Protection relays trip indication
Cubicles status
Voltage presence: VD23
Measurement: Power Meter: I, U, power, energy,
Concentrator of other Modbus slaves:
Time stamping
Clock synchronisation through DNP3 or IEC protocol or Ethernet
Date stamping discrepancy: 20 ms
Monitoring digital and analogue variables
Managing alarms or simple recording: thresholds, dead band, ...
Configurable recording settings
Archival capacity:
Event Log
Alarm Log 2000
Measurement log 50000
System Log 6000

12. SCADA Communication NEW! Compatible with all SCADA Systems
Catalogue of protocols including the major standards with IP versions
IEC and 104
DNP 3 level 3 serial and TCP/IP
MODBUS serial and TCP/IP
Compatible with all communication media
A large catalogue of built-in modems: RS232/485, radio (FFSK), PSTN V32, Ethernet, GSM/GPRS/3G
The RS232/RS485 interface can handle external modems
SMS, Mail
One “modem” port + one Ethernet port
NEW!

13. Standby supplies high availability Guaranteed Switchgear Operation
An energy Battery and charger sized to supply
Motor drive systems: 24 or 48 VDC
Transmission equipment: 12VDC, 1A permanent, 7 A peak
Substation equipments
Total max power 90W permanent
Guaranteed long battery life
A regulated and temperature compensated charger
Protection against total discharging Schematic with external relays proposed for long duration outages
Guaranteed power supply availability
Continuous power supply self-checking
Typical autonomy: 16 hours with 10 O/C cycles
Alarm returned if fault occurs
Battery service life at 20°C: 10 years

14. A powerful configuration tool 2 major new features for better efficiency and productivity
Off-line configurator: Same Web pages can run locally on the PC or on the R200/ATS100
Modbus slaves auto discovery with predefined configuration files
NEW!
NEW!

15. Easy to setup Easy&Quick System Configuration
Scan 1 2 3 4 ON
T/R
ATS 100 1 2
NEW!
Data
In order to make commissioning an easy, straight forward, and therefore fast task, R200 and ATS100 are fitted with features new to the Easergy range:
User can activate a scan of the Modbus slaves that will automatically detect all slaves connected and the associated default configuration and data (Of course, this applies only to Modbus slaves part of the system).
User tasks is therefore finally limited to configuring each of the devices according to his application needs as well as configure R200 specific configuration parameters such as communication to SCADA
Scan & Modbus slaves auto-discovering
Display the single line diagram
Display each device data
Configure each device according to application and R200 (communication etc...)

16. Powerful diagnostic and alarm through Web pages simplicity
Powerfull diagnostic and alarm through Web pages
Data view
Single line
System view
Alarming

17. A whole system for control and monitoring
32 devices max
Daisy chaining of smart modules
Self configuration
Automatic Modbus configuration
Automatic module detection and configuration
Sensors, HMI, devices integrated in cubicle
One power supply for the whole switchboard
See each product presentation (SC100, PS100, Flair 2xd, etc…) for more details)

18. Easergy ATS100 Specific Functions

19. ATS100 Features Module dedicated to source change over Main functions
Inherits from all R200 functions
Own box + dedicated interface
Only field bus interface with the switchgear
Main functions
Automatic source change over (lines, bus tie)
Safe manual operation
With or without // coupling
Remote communication (Ethernet, 2G, 3G)

20. ATS100 Architecture Auxiliary supply provided by PS100
SC110
SC110
Auxiliary supply provided by PS100
ATS100 : 12V or 24 or 48V
SC110, Flair 23DM, motorisation : 24 or 48V

21. ATS- ACO : 1/ lines

22. ATS-BTA : 2/3 - 2 lines + bus tie
Bus tie normally open

23. Dedicated HMI (2/3) Local /remote On / Off Automatic change over
Behaviour
Auto return (no predefined normal source)
No return (keep on back-up source after change over)
Self return (back on normal source possible after change over)
Manual operation
Sequenced operation on switchgear

24. Dedicated HMI (3/3) Reset automation (Unlock)
LED and communication test (SCADA and system)