Download presentation
Presentation is loading. Please wait.
Published byYvonne Gardener Modified over 10 years ago
1
Objectives Describe the lighting parameters Learn about lamps Define project 2
2
Photometrics Luminous intensity [candela, cd] Define the ability of light source to generate light (illumination) in given direction Power – luminous flux [lumen, lm] Quantity of light Illuminance – light power density [foot-candela, fc] [lux, lx] SI units Density of light (illumination) incident on a surface Luminance - surface brightness [foot-lambert, lm/ft 2 ] directional emission of visible light
3
Illuminance (E) depends on angle Example: Spot light with luminous intensity I= 5000cd is aimed at painting at the wall 5 ft from the light and the angle φ=45°. What is the illuminance level (E) at the center of the painting?
4
Solution Distance: Illuminance orthogonal to the beam E=I/L 2 =5000/ E beam = 100 fc Illuminance orthogonal to the painting E painting = E beam / E painting =71 fc
5
Color of light Color temperature is used to express the color of the light
6
Surface color rendering Depending on the light type the surface colors can be different Depends on spectral energy distribution
7
Color rendering lamp source can cause a color shift
8
Color rendering index (CRI) Indicate if a lamp source will cause a color shift. Definition: CRI =100 for incandescing lamp with color temperature 3000K
9
Luminous efficacy Define the light output per unit of electric power input Efficacy = Lumens/Watt
10
Lifetime of lamps Rated life of lamp is time elapsed when 50% of group of lamp remain burning.
11
Lumen deprecation Data for fluorescent lamps Lumen output fall during the life time
12
Ref: Tao and Janis (2001) Types: Incandescent Electric discharge Fluorescent HID High-intensity Discharge Lamp
13
Incandescent Thomas Edison first incandescent lamp Efficacy of 1.4 lumens/watt Life – 750 to 1000 hours 10 – 20 % decay in output
14
Specialty Incandescent Lamps Halogen Low voltage Long-life Infrared Interference filters
15
Is Dimming Bad For Incandescent Lamps? - 10% lower Voltage - 25% lower light - life of lam doubles
16
Fluorescent Lamps Electrodes arc through mercury vapor Phosphors fluoresce in visible range Efficacy of 60 to 100 lumens/watt (after burn-in)
17
Ref: Tao and Janis (2001)
18
20,000 hour life for tubes Output falls off significantly (lumen deprecation) We define mean lumens at 40% expected life Environmental hazard because of mercury Significant improvement with lumen deprecation and life with new types of fluorescent lamps Start of the lamp vary with type of fluorescent lamp Fluorescent Lamps
19
Ballasts Why do we need ballasts? Transformer –higher voltage Limit the maximum flow of current - choke Types: Magnetic Noisier, cheaper, less efficient (more heat) Electronic Quieter, better power factor, more expensive Lower harmonic distortion Higher frequency
20
Comparison Incandescent: 40 W × 8760 hr/year = 350 kWh Demand charges, maintenance, additional cooling Uneven illumination LED: 1 W × 8760 hr/year = 8.8 kWh 1/40 th of the energy charges, lower demand, less maintenance, lower cooling bills More even illumination
21
High Intensity Discharge (HID) Arc through conducting vapor High temperature and pressure Ceramic or quartz tubes Glass protective casing Also need ballast (electric discharge lamps)
22
Ref: Tao and Janis (2001)
23
Types of HID Lighting TypeColor Temp. (K) Efficacy (lumens/W) CRILifetime (1000 hours) Mercury571020-6015-5024 HPS High pressure sodium 210014022-7016-40 LPS Low pressure sodium 1740 (yellow) 200~010-20 1 Metal Halide 3600~100<7010-20 1 minimal decline in output with aging
24
Issues with HID lighting Long start-up ~ minutes Arc needs to stabilize, heat vapor Even longer restart Up to 40,000 hour life time
25
What is next in lamp technology LEDs - light emitting diodes Semiconductor technology Exit signs Electrodeless Lamps Induction lighting Microwave lighting High efficiency Possible interference with wireless networks Nuclear Light Source
26
Comparison TypePower (W)Lifetime Incandescent402 – 8 months Fluorescent10 – 251 – 2 years LED light emitting diodes ~110+ years Tritium nuclear 010 – 20 years
27
Lamps are not the only thing Fixtures (luminaire) Application requirements Mounting Distribution
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.