Presentation is loading. Please wait.

Presentation is loading. Please wait.

Hexbug Worksheet 02 2D Drawings & Sketches of a Hexbug

Published byสุริยะ เคนเนะดิ Modified over 5 years ago

Similar presentations

Presentation on theme: "Hexbug Worksheet 02 2D Drawings & Sketches of a Hexbug"— Presentation transcript:

1 Hexbug Worksheet 02 2D Drawings & Sketches of a Hexbug
Complete the worksheet for lesson 2 by following your teachers instruction. Definitions for designers: 2D = two dimensional drawing where the finished drawing has two overall measurements, a length and a width. 3D = three dimensional drawing where the finished drawing has three overall measurements, adding depth. 2D Drawings & Sketches of a Hexbug

2 Hexbug Worksheet 02 3D Drawings & Sketches of a Hexbug Inchworm Crab
Complete the worksheet for lesson 2 by following your teachers instruction. 3D Drawings & Sketches of a Hexbug Inchworm Crab

Download ppt "Hexbug Worksheet 02 2D Drawings & Sketches of a Hexbug"

Similar presentations

Unit 2: Engineering Design Process

Unit 2: Engineering Design Process
Objective WRITE IN AGENDA EVERY DAY Assess student info/knowledge Materials Needed Pencil Eraser Sketch work WRITE IN AGENDA EVERY DAY None this week.

Objective WRITE IN AGENDA EVERY DAY Assess student info/knowledge Materials Needed Pencil Eraser Sketch work WRITE IN AGENDA EVERY DAY None this week.
Lesson 3-5 Example 1 10-5 Example 1 What is the volume of the rectangular prism? 1.The length of the rectangular prism is 6 units. The width of the rectangular.

Lesson 3-5 Example Example 1 What is the volume of the rectangular prism? 1.The length of the rectangular prism is 6 units. The width of the rectangular.
Introduction: Definition Introduction: Definition A flowchart is a diagram that describes a process or operation. It includes multiple steps, which the.

Introduction: Definition Introduction: Definition A flowchart is a diagram that describes a process or operation. It includes multiple steps, which the.
Do Now. Homework Solutions 1)c 2 – 26c – 56 = 0 (c – 28)(c + 2) = 0 {-2, 28} 2)n 2 + 4n – 32 = 0 (n + 8)(n – 4) = 0 {-8, 4} 3)h 2 + 2h – 35 = 0 (h + 7)(h.

Do Now. Homework Solutions 1)c 2 – 26c – 56 = 0 (c – 28)(c + 2) = 0 {-2, 28} 2)n 2 + 4n – 32 = 0 (n + 8)(n – 4) = 0 {-8, 4} 3)h 2 + 2h – 35 = 0 (h + 7)(h.
Volume of cubes and cuboids

Volume of cubes and cuboids
Foundations of Technology Calculating Area and Volume

Foundations of Technology Calculating Area and Volume
Surface Area of Prisms Unit 5, Lesson 2. What is a Prism? Definition: –A three dimensional figure with 2 congruent polygon bases and rectangular sides.

Surface Area of Prisms Unit 5, Lesson 2. What is a Prism? Definition: –A three dimensional figure with 2 congruent polygon bases and rectangular sides.
3-4 Lesson 3-4 Example 1 Use the formula A = ℓ w to solve for ℓ, length. The area of the rectangle is 72 square yards. Its width is 9 yards. What is the.

3-4 Lesson 3-4 Example 1 Use the formula A = ℓ w to solve for ℓ, length. The area of the rectangle is 72 square yards. Its width is 9 yards. What is the.
ICreate Session 6 of 8 Conducting a Peer Review. Focusing Questions How can I improve my technology- enriched lesson? What methods can I use to get feedback.

ICreate Session 6 of 8 Conducting a Peer Review. Focusing Questions How can I improve my technology- enriched lesson? What methods can I use to get feedback.
Intersection of Straight lines Objectives ─ To be able to find the intersection Pt of 2 lines ─ To solve simultaneous equations ─ To solve the intersection.

Intersection of Straight lines Objectives ─ To be able to find the intersection Pt of 2 lines ─ To solve simultaneous equations ─ To solve the intersection.
Purpose: To solve word problems that involve area. Homework: Finish teaching worksheet. Pg. 173 1-6 all.

Purpose: To solve word problems that involve area. Homework: Finish teaching worksheet. Pg all.
Agenda More practice with isometric drawings

Agenda More practice with isometric drawings
Monday, October 19 Objective: Students will create 3 more isometric sketches during class. Bellringer: What must be sketched in light lines BEFORE beginning.

Monday, October 19 Objective: Students will create 3 more isometric sketches during class. Bellringer: What must be sketched in light lines BEFORE beginning.
BELL RINGER What is the area of a regular decagon if its side length is 12 m and its apothem is 5m? Suppose the perimeter of some n-gon is 230 feet. If.

BELL RINGER What is the area of a regular decagon if its side length is 12 m and its apothem is 5m? Suppose the perimeter of some n-gon is 230 feet. If.
Multiview Drawing A multiview drawing is one that shows two or more two-dimensional views of a three- dimensional object. Multiview drawings provide the.

Multiview Drawing A multiview drawing is one that shows two or more two-dimensional views of a three- dimensional object. Multiview drawings provide the.
CONSTRUCTION DAY! Segment and Angle Bisectors LEARNING TARGETS: 1. I will be able to construct line segment bisectors and angle bisectors with a compass.

CONSTRUCTION DAY! Segment and Angle Bisectors LEARNING TARGETS: 1. I will be able to construct line segment bisectors and angle bisectors with a compass.
Drawing With Lines and Shapes!

Drawing With Lines and Shapes!
Strategy for Advanced Multiplication Nadine Gilkison.

Strategy for Advanced Multiplication Nadine Gilkison.
200 300 400 500 100 200 300 400 500 100 200 300 400 500 100 200 300 400 500 100 200 300 400 500 100 Adding SubtractingMultiplyingDividingMiscellaneous.

Adding SubtractingMultiplyingDividingMiscellaneous.

Similar presentations

Ads by Google