2. 8
Products Designed For Maximum Protection

3. 8 Products Designed For Maximum Protection
At Insulmastic we invest in research and development of new products for corrosion protection, sealing and repair problems. We are constantly seeking innovative ways to economically and easily solve problems on board, or on site. 8
Products Designed For Maximum Protection

4. Modern Polymer modification process
Heavy Duty Strips (5mm)
Reinforced Mesh
Modern Polymer modification process
Costs up to 50% less than Ram-Nek competitors
Non-removable
Poly core
Sealant
Mesh
Sealant
Peel-off paper
backing

5. Easy to Apply
4 Remove paper backing from CanSeal® Strip and press into place, covering hatch joint
1 Surface must be clean and dry
2 Remove loose rust and old tape
5 Step firmly on the full length of tape
3 A thin layer of old CanSeal® can be used as a base for the new application
6 In cold weather it is advisable to heat the hatch surface and adhesive side of tape before application

6. Roll-type Marine Tape
High tack adhesive mastic
Textured silver backing
Combines quality and convenience
Costs up to 50% less than the competition

7. Tape Test
30 Metric Ton Covers
Tape holds the Cover down

8. Helps make steel hatch covers watertight
even under heavy seas conditions

9. Preparation of the steel hatch is very important

10. Protects your pipes,valves and fittings against corrosion
Minimum preparation for application
Protects new or corroded surfaces
Withstands temperatures -40ºC to 65ºC
Crews can be easily trained for application

11. Avoid this common problem
Use PetroWrap®

12. High temperature pipe dressing for corrosion protection of
steam pipes, valves, windlass cylinder blocks and deck winches
Forms a flexible “skin” when cured, will not crack or peel during expansion and contraction of pipes
Withstands temperatures -60ºC to 230ºC
SteamKote® Is the only non-flammable pipe dressing

13. Avoid this expensive and time consuming corrosion problem

14. Application is easy and no major preparation is necessary

15. One-step application in Blanket and Tape formats
Quick and easy way to insulate high temperature surfaces in engine rooms
One-step application in Blanket and Tape formats
Easily removed and reinstalled using ExoWrap® ‘Silhesive’ Tape
Rated for use to 1000ºC max
Meets IMO Resolution MSC.61(67)
Meets SOLAS Regulation ll - 2/

16. ExoWrap® Blanket
For use on straight pipes, valves, exhaust equipment, turbo chargers, angled and uneven surfaces and anywhere that insulation is required. ExoWrap® Blankets are secured with ExoWrap® ‘Silhesive’ Tape for ease of maintenance.
Pipe (1-2 m)
Blanket
Blanket (aluminum backing)
Sealing Tape applied
Blanket (aluminum backing)
Pipe (1-2 m)
Pipe (1-2 m)

17. ExoWrap® Tape
For use on bent and flanged pipes in areas where maintenance is not a consideration and/or space is limited. ExoWrap® has a pressure sensitive adhesive on the inner side for ease of installation.
Completey wound at thread
and welded area
Pipe
ExoWrap Tape wrapped
in spiral motion
ExoWrap blanket cut to cover the pipe
Pipe

18. Available in various widths which can be cut to size for use
Designed to contain the spray of hazardous liquids in vessel engine rooms
Available in various widths which can be cut to size for use
on flanges, valves, fittings, or any irregular shaped surfaces
Easily installed using our drawstring system
Removable, reusable and extremely durable
Pocket
Lacing Wire
Shield
Special cut holes
Meets SOLAS Regulation II -2 /

19. Aluminum/glass cloth jacketing system designed
to prevent the flammable spray of hot oil
Available in Tape and Sheet formats
Coated on one side with a silicone adhesive for ease of installation and superior adhesion
Meets SOLAS Regulation ll - 2/

20. Completely wrapped
pipe and all
connecting devices
NoSpray Tape
Wrap snugly around Flange
Hot Surface
Leaking Oil
Leaking Oil

21. A complete system for making emergency repairs to any pipe material
Fiberglass tape impregnated with water-activated resin that sets in minutes
No measuring, no mixing, no messy clean-up

22. A tub of epoxy for filling and sealing A pair of gloves
Each Kit comes with
A roll of CanFix cloth
A tub of epoxy for filling and sealing
A pair of gloves
Application instructions
Approved and used by the
U.S. Navy and Coast Guard

23. Worldwide Distributors
Turkey
U.A.E
Vietnam
Australia
Belgium/Netherlands
Brazil
Canada - Vancouver
Chile
China
Denmark
Finland
Germany
Greece
Hong Kong
Houston
Iceland
India
Iran
Iraq
Italy
Korea
Lithuania
Los Angeles
New Orleans
Pakistan
Panama
Peru
Russia
Saudi Arabia
Singapore
South Africa
Spain
Taiwan