1. with EUSAAR NA2 Partners
Towards Reference Methods for Measuring Particulate Organic and Elemental Carbon
J.P. Putaud
European Commission, DG JRC, Institute for Environment and Sustainability, I Ispra (Va)
with EUSAAR NA2 Partners
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

2. Near-City Urban background Kerbside Rural 633 NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Near-City
Urban background
Kerbside
Rural
39 sites where both PM and chemistry were obtained from
633

3. The issue: Carbonaceous atmospheric particulate
matter consists of 100’s of species
with very different properties
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
J. J. Schauer et al. Atmospheric Environment 41 (2007) S241–S259

4. If saturation pressure  ambient gas-phase concentration
Adapted from Seinfeld and Pandis., 1998
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
If saturation pressure  ambient gas-phase concentration
Particulate / Gas phase partitioning very sensitive to changes in T and P
→ Sampling artifacts can occur

5. Positive artifacts account for > 25%
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Turpin et al., 1993
Positive artifacts account for > 25%

6. Negative artifacts can reach 80%
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Eatough et al., 1993
Negative artifacts can reach 80%

7. The solution ? BOSS / Big BOSS sampler - quite complex set up
- not as well characterised as it should be
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Eatough et al., 1996

8. The EUSAAR prototype Tested / being tested at EUSAAR sites
10’
Sampling head
Denuder
Carbon honeycomb monolith
dia. 2’
dia. 1.25’
Quartz filter
The EUSAAR prototype
Tested / being tested at EUSAAR sites
Gas + Particles
Particles only
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Sorbent for trapping carbon
volatilised from quartz filter

9. NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

10. Positive artifact NOTES 1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

11. Denuder efficiency (11) (7) (6) (7) (7) (3) NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
(11) (7) (6) (7) (7) (3)

12. Positive artifact NOTES 1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

13. Positive artifact NOTES 1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

14. Negative artifacts quartz sorbent NOTES 1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
quartz
sorbent

15. The amount of C collected by CIG is significant
Negative artifacts
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
The amount of C collected by CIG is significant
CIG collect OC with 55-74% (av. 62%) efficiency

16. Atmospheric particulate carbon analyses
Adapted from Rogge., 1993
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

17. Benzene Coronene Graphite
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
Adapted from Cachier., 1989
VOC POC EC
H/C ratio  0
Volatility high low  0

18. Evolved gas analysis: TC, OC, EC
800
700
600
500
400
300
200
100
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

19. NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

20. Standard deviation among EUSAAR Partners: 11%
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

21. Standard deviation among EUSAAR Partners: 72%
- correcting for charring: 39%
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

22. Standard deviation among EUSAAR Partners using NIOSH: 48%
using EUSAAR: 13%
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

23. maximizing OC evolution in He minimizing LAC early combustion
minimizing charring
maximizing OC evolution in He
minimizing LAC early combustion
minimizing C evolution at split point
Protocol EUSAAR_2
temperature
laser signal (LAC)
FID signal (evolved C)
850
450
650
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.
550
500
450
300
200

24. Conclusions: Carbonaceous atmospheric particulate sampling
Limiting positive artifacts: successful
Assessing negative artifacts: still searching
Carbonaceous atmospheric particulate matter analysis
EUSAAR_2 guarantees minimum discrepancies
Further work needed for carbonate rich samples
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

25. NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

26. NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.

27. Jul. 2002 – Jul. 2003, EMEP campaign sites:
EC contributions to PM10
Jul – Jul. 2003, EMEP campaign sites:
NOTES
1. PLACE, DATE AND EVENT NAME
1.1. Access the slide-set place, date and event name text box beneath the JRC logo from the Slide Master.
1.2. Do not change the size nor the position of that text box.
1.3. Replace the mock-up texts for the place (“Place”), the date (“dd Month YYYY”) and the event name (“Event Name”) with your own texts.
1.4. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
1.5. Keep the original flush-left justification.
1.6. Keep the original font colour (white).
1.7. Keep the original font body size (7 pt) and the text on one single line.
2. SLIDE NUMBER
2.1. The slide number on the banner’s lower right-hand side is automatically generated.
3. SLIDES
3.1. Duplicate the first slide as needed.
3.2. Do not change the size nor the position of the slide’s text box.
3.3. Try not to place more text on each slide than will fit in the given text box.
3.4. Replace the mock-up heading text (“Joint Research Centre (JRC)”) with your own text heading.
3.5. Set it in Eurostile Bold Extended Two or in Helvetica Rounded Bold Condensed, if you own one of these typefaces. Otherwise, keep the original typeface – Arial.
3.6. Keep the original flush-left justification.
3.7. Keep the original font colour (100c 80m 0y 0k).
3.8. Keep the original font body size (28 pt) and the heading on one single line whenever possible. Reduce the font body size if needed.
3.9. Replace the mock-up text (“The European Commission’s Research-Based Policy Support Organisation)”) with your own text.
3.10. Set it in MetaPlus Book Roman, if you own the typeface. Otherwise, keep the original typeface – Arial.
3.11. Keep the original flush-left justification.
3.12. Keep the original font colour (100c 80m 0y 0k). Use black if you need a second colour.
3.13. Keep the original font body size (22 pt) or reduce it if unavoidable.
3.14. Replace the EU-27 map mock-up illustration with your own illustration(s).
3.13. Try to keep your illustration(s) right- and top- or bottom-aligned with the main text box whenever possible.