1. IEEE 802.21 MEDIA INDEPENDENT HANDOVER DCN: 21-08-00xx-00-0000
Title: Addressing Comment #2171
Date Submitted: March 20, 2008
Presented at IEEE session #25 in Orlando, Florida
Authors or Source(s):
  Y. Alice Cheng, Yoshihiro, Ohba and Qiaobing Xie
Abstract: This document
21-07-xxxx

2. IEEE 802.21 presentation release statements
This document has been prepared to assist the IEEE Working Group. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE
The contributor is familiar with IEEE patent policy, as stated in Section 6 of the IEEE-SA Standards Board bylaws < and in Understanding Patent Issues During IEEE Standards Development
IEEE presentation release statements
This document has been prepared to assist the IEEE Working Group. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
The contributor grants a free, irrevocable license to the IEEE to incorporate material contained in this contribution, and any modifications thereof, in the creation of an IEEE Standards publication; to copyright in the IEEE’s name any IEEE Standards publication even though it may include portions of this contribution; and at the IEEE’s sole discretion to permit others to reproduce in whole or in part the resulting IEEE Standards publication. The contributor also acknowledges and accepts that this contribution may be made public by IEEE
The contributor is familiar with IEEE patent policy, as outlined in Section 6.3 of the IEEE-SA Standards Board Operations Manual < and in Understanding Patent Issues During IEEE Standards Development
21-07-xxxx

3. Comment #2171
The MIH_Link_Configure_Thresholds is a parameterized event subscription. The additional parameter of the threshold can be merged to the "Event Configuration Info List" parameter in the MIH_Event_Subscribe primitive.
Proposed Resolution
1. Add LIST(LINK_CFG_PARAM) to EVT_CFG_INFO data type as an option after the LIST(LINK_DET_CFG).
2. The event configuration response would also need to include a LIST(LINK_CFG_STATUS) (perhaps in a choice) that would allow the subscriber to know which threshold actually were recorded.
3.Remove MIH_Link_Configure_Thresholds.
4. Remove the MIH_Link_Configure_Thresholds request and response messages in clause 8
21-07-xxxx

4. Replace the sentence at sentence to p96L45:
Decision: Principle
To allow MIH user to receive the MIH_Link_Parameter_Report event which corresponds to a specific threshold(s). Apply the proposed resolution 1 and 2 only.
No change to MIH_Link_Configure_Thresholds primitive. It sets the threshold on the link that in turns trigger MIH_Link_Parameter_Report event to all subscribers regardless of which MIH User invokes the MIH_Link_Configure_Thresholds primitive.
Replace the sentence at sentence to p96L45:
“This command configures the thresholds that will trigger MIH_Link_Parameters_Report event.” to
“This command configures one or more thresholds. When a given threshold is crossed, an MIH_Link_Parameters_Report notification is sent to all MIH Users which are subscriber to this threshold-crossing event.”
21-07-xxxx