1. Eng. Ibrahim Kuhail Eng. Ahmed Al-Afeefy
Lab 7: Repliset
Eng. Ibrahim Kuhail
Eng. Ahmed Al-Afeefy

2. Objective
To allow for microscopic examination and precise measurements of material surfaces.

3. Introduction RepliSet is a complete system for replicating materials.
It is designed to transfer the structure of a solid surface to a flexible, highly accurate and stable replica. The result is an exact 3D copy of the surface, allowing microscopic examination and precise measurements.

4. Applications of Repliset Inspection
Typical applications are on-site nondestructive testing in connection with quality control, inspection, maintenance, reconditioning and failure analysis, typically within high tech engineering industries including power generation (fossil fuel or nuclear), aerospace, offshore industry, etc.
The use of high-resolution RepliSet replicas allows otherwise inaccessible surfaces and irregularities in critical machinery in service to be examined and measured under laboratory conditions.
Detection and monitoring of pitting, corrosion, cracking, creep, deformation and wear
Assessment of change in micro- structure
Inspection of internal surfaces such as bolt hole threads and root welds in small bore tubes
Quality control of edges, heights, angles, surface finish, thread profiles and other dimensions

5. RepliSet The main components of the RepliSet instrument are:
Hand Operated Dispensing Gun
Cartridge Clip .
Dispenser Body.
Slide Release Lever.
Piston Slide.
Dispenser Handle.
Disposable Static-Mixing Nozzle
Cartridges: curing two part silicon rubber compound of flexible high resolution replicas of microstructure or 3D structure.

6. RepliSet Components (Cont.)
Cartridge
Mixing Nozzle
Hand Gun
May 8, 2019
Lab # 6: Method Study

7. RepliSet Components (Cont.)
Cartridge Clip
Dispenser Body
Slide Release Lever
Piston Slide
Dispenser Handle
May 8, 2019
Lab # 6: Method Study