1. FINISHING , PRESSING AND PACKING METHOD FOR SHIRT
LESSON – 16
FINISHING , PRESSING AND
PACKING METHOD FOR SHIRT

2. FINISHING Shirt finishing have different steps – 1. Thread cutting
2. Stain removing
3. Measurement checking
4. Find defect faults

3. 1. Thread cutting
Must cut all the excess threads – e.g. at the end of all seams , button hoes , buttons , at collar and cuffs , on hem etc.

4. 2. Stain removing What is the difference between stain and spot ?
Stain means main - spot means surrounding area of the stain
Types of stain – use proper removal – e. g. for stain of cream , we use carbon tetra chloride , soap and water
( continue..)

5. CHEMICALS USED FOR STAIN REMOVAL
- Carbon tetrachloride
- Hydrochloride acid Oleic acid
- Acetic acid
- Ammonium acetate
- Ammonia solution
- Glycerin
- Benzyl alcohol
- Benzene
- Hydrogen peroxide

6. 3. Measurement checking Check all components as per specification
sheet – check stitches per inches - seam type - length –
width – placket and pocket balancing – sleeve length
–cuff balancing – collar points – stand shapes – side
seam length - button hole distance – button fixing – hem width

7. 4. Find defect faults - Stitch with seam - Puckering
- SPI ( + 2 or - 1 )
- Open stitching
- Off stitching
- Loose or broken stitching
- Holes
- Uneven pocket or flap
- Sticker, scrap etc.
- Stitch with seam Puckering
- Button hole ( un cut, incomplete, uneven )
- Stains
- Wrong marking
- Wrong material used