1. DRV8835 Troubleshooting Fr8 removed Test conditions:
TP24= variable lab supply
Vcc= 3.3V lab supply
PHS = 0V
Lsr_tec_en=3.3V
1.4 Ohm resistive load attached to
(lsr_tec+, lsr_tec-)

2. DRV8835 Troubleshooting
TP24
Bridge shutting down
Lsr_Tec+

3. DRV8835 Troubleshooting
TP24
Bridge re-enabled
Lsr_Tec+

4. DRV8835 Troubleshooting
Bridge shut off mode
TP24
TP24
Lsr_Tec+
Lsr_Tec+

5. As TP24 increases, the bridge is disabled and re-enabled
DRV8835 Troubleshooting
TP24
As TP24 increases, the bridge
is disabled and re-enabled
Bridge disabled & re-enabled
Lsr_Tec+
Added caps
100uF // C76
.15uF to GND at TP24