1. SATELLITE MIGRATION PROJECT
Contractor Orientation

2. SATELLITE FREQUENCY ViStar
Press “menu”, select “system configuration” and press “ok”.
Enter 4-digit “access code”, default is “1234”.

3. SATELLITE FREQUENCY ViStar Select “factory default” and press “ok”.
Enter 4-digit “access code”, default is “1234”.

4. SATELLITE FREQUENCY ViStar
A prompt will appear, “do you want to reset receiver?”, press “ok”.
The “welcome” prompt will appear, press “ok”.

5. SATELLITE FREQUENCY ViStar
The “LNB configuration” window will appear, press “ok”.
The “Add channels” window will appear, enter the following parameters:
Frequency
Symbol Rate
Polarization V
Search Type Network

6. SATELLITE FREQUENCY ViStar
Press “ok” to search channels. The message “Searching in process, please wait” will appear. After search is completed, press “ok” to finish.
To add another frequency, repeat steps 8-9 but enter the frequency “ ” in step 8 under “TP2”.

7. SATELLITE FREQUENCY ViStar
Repeat steps 8-9 but enter the frequency “ ” in step 8 under “TP3”.
Press “exit” to finish.

8. Subscriber/Representative Name & Signature
FORMS & FORMATS
JOB ORDER FORM
Control No.:
Installer Name :
Dealer :
Subscriber Name :
Subscriber Contact No. :
Address :
Items Replaced :
Low Noise Block (LNB) Converter
Others :
Antenna Dish
Bracket
RG-6 Cable
I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly.
Subscriber/Representative Name & Signature