1. Introduction to the POWERLOGIC® PM700 Series Power Meters1

2. PowerLogic systems help you control the cost, quality and reliability of your utilities
Since 1989, PowerLogic systems have helped customers improve productivity and profitability by helping them to …

3. PowerLogic systems help you… Measure and control energy costs
Verify utility bills; participate in utility rate reduction programs
Reveal energy waste
Verify savings resulting from equipment upgrades, energy efficiency programs, or performance contracts
Perform demand and power factor control; reduce demand charges
Allocate or sub-bill energy costs
Measure all utilities (water, air, gas, electric, etc.) and optimize energy procurement
Save 2-4% of utility bills, by knowing where and how energy is being used.

4. PowerLogic systems help you… Optimize equipment use
Prolong asset life by balancing loading, and measuring and reducing harmonics and other factors that cause heating and shorten equipment life
Maximize the use of existing capacity and avoid unnecessary capital purchases by understanding loading and identifying spare capacity on existing equipment
Save 2-5% on operating costs, by optimizing utilization and eliminating unnecessary equipment purchases.

5. PowerLogic systems help you… Improve power quality and reliability
Receive early warning of impending problems
Accurately detect and capture magnitude and duration of power quality events
Diagnose and isolate the cause of power-quality-related equipment or process problems
Verify reliable operation of power distribution and mitigation equipment
Proactively assess power quality trends and conditions to identify vulnerabilities
Baseline power quality conditions and verify improvements as a result of equipment upgrades
Save up to 10% or more in productivity and resources by improving power quality and reducing downtime.

6. PM700 series overview
The PM700 series of power meters are compact power and energy meters.
Apply on feeders where cost and installation space are important considerations.
Install into new equipment or retrofit into existing installations.

7. The PowerLogic power monitoring family
CM4000
Apply to Critical Power
Extensive Power Quality
Transient Detection (CM4-T)
Wave shape fault recording
Variety of I/O options
Highest revenue accuracy
GPS time synchronization
Functionality
CM3000
Apply to Mains and Key Feeders
Advanced Power Monitoring
Power Quality with disturbance detection and 100 ms event recording
Onboard data logging with 8 MB of memory
Disturbance direction detection
PM800
Apply to Mains and Feeders
Comprehensive Power Metering
Basic Power Quality
Onboard data logging
Compact Design
Disturbance waveform Capture
PM700
Apply to Feeders
Power Metering
Sub-metering / cost allocation
THD monitoring

8. Part of a complete solution
PM700 series power meters can be used for standalone panel instrumentation, or as a key component in a complete PowerLogic power monitoring and control solution that provides transparent access to all of your intelligent devices.
Software - System Manager
Data Communications - EGX EGX Modems
Intelligent Devices - Circuit monitors
- Power meters
- Low voltage breakers - Med voltage relays - Other Modbus devices
Other compatible devices
Energy and power quality meters and monitors
Energy and
power quality meters
The PM710 and PM750 power meters’ have standard RS-485 Modbus communications, allowing you to view data in power monitoring software, or integrate data into Building Automation and SCADA systems.
Energy and power quality meters and monitors
Other compatible devices

9. Typical applications Energy/demand management
Low voltage panel instrumentation
Cost allocation
Machine monitoring

10. Feature Summary
Four models satisfy a range of applications—from the PM700 for basic panel instrumentation, to the PM750 with standard RS-485 communications, I/O and alarming.
PM700
PM700P
PM710
PM750
Power Factor
Absolute
Signed
15 user-configurable alarms n
Onboard digital I/O
2 out  
2 in /1 out
RS-485 Modus communication
THD (voltage and current)
Min/Max values with reset
Basic metering (voltage, current, power, energy, demand, frequency, etc.)
Accuracy Real Energy (IEC Class 1)
IEC Class 05.S

11. Large, easy-to-read display
Backlit LCD display
Anti-glare, scratch resistant
Displays four values simultaneously; view three phases and neutral
View summary screens and bar chart displays to see a snapshot of your system
Intuitive, self-guiding menus are easy to use without training
The power meter’s large, backlit display is easy to read.

12. External connections Power supply
Voltage Inputs — 480 VAC L-L direct connect; eliminates the need for PTs in most LV Panels
Current inputs — rated at 15A, able to withstand overcurrents from CTs
I/Os
PM700P and PM750
RS wire Modus communications (PM710 and PM750 only)
Communicate to System Manager software
Integrate into BAS or SCADA systems
Download firmware updates to keep up-to-date with the latest features

13. Compact design 96 x 96 x 50mm (depth behind panel)
Shallow depth saves panel space
Flush panel mount with a 92 x 92mm cutout

14. Designed with the panel builders/OEMs in mind
Single person installation
No tools required to mount the meter
Mounting resistance nibs hold meter until the mounting clips are snapped into place
Wide range control power supply
100 – 415 Vac (5 vA); 125 – 250 Vdc (3 watts)
Reduces the number of models to order and stock

15. Accurate energy and power measurement
Full complement of basic metered values including:
Voltage, per phase (L-L, L-N) and 3-phase average
Current, per phase and neutral, and 3-phase average
Energy (kWh, kVARh, kVAh)
Power, per phase and 3-phase total (kW, kVA, kVAR)
Power Demand, present, last, and peak (kWd, kVAd, kVARd)
Current Demand, per phase, present and peak
Frequency and Power factor (total)
THD, per phase (voltage and current)

16. Accurate energy and power measurement (continued)
Minimum and maximum values
Current and voltage, per phase
Power (total)
Power factor (total)
Frequency
THD, per phase (current and voltage)

17. Digital Inputs and Outputs
PM700P
Two digital KY pulse outputs
One kWH pulse output
One kVARh pulse output

18. Digital Inputs and Outputs (continued)
PM750
2 digital inputs
Use to monitor breaker status, or other status applications
Demand Interval Synch – will end the power demand interval on the OFF to ON transition.
1 digital output configurable in one of three modes:
External—Controlled externally, for example by a programmable controller.
Alarm control—Controlled by the power meter in response to an alarm condition. When the alarm is active, the output is ON.
kWh Pulse—The meter generates a fixed-duration pulse output that represents kWh consumption.
The PM750’s digital output can be configured in one of three modes.
With the two inputs of the PM750 you are able to know the status of other devices in the system, as for example Micrologic breakers. One of the inputs is used to know when the breaker is closed and the other to know when the breaker is opened. To be able to control breaker, the application requires two digital outputs. Therefore the PM750 is not suitable for those applications.

19. Customizable Alarming (PM750)
Fifteen user-configurable alarms
Configurable: Pick up, drop out, and delay
Alarms can be associated to I/O
Trigger alarms in response to a change in input status
Control an output in response to an alarm
Alarms could be viewed in System Manager Software, provide early warning of potential problems.
The PM750 does not include memory or alarm log, so when the PM750 looses control power, the alarms’ information is lost.

20. Easy to create a system...
With the addition of an Ethernet Gateway, the meter can communicate via the existing network
Create a simple system using a power meter, EGX400, and a PC with web browser software. View:
Instantaneous readings of amps, voltage, power and energy
I/O status
Alarm status and history
No special software to install
PC with Browser
EGX400 Gateway
PM7

21. Need more information? PowerLogic web site – www.powerlogic.com
Contact your local Schneider Electric sales representative or visit us on the web:
PowerLogic web site –
Corporate –
Merlin Gerin Products –
The Power of Integration:
In 2005, Schneider Electric acquired Power Measurement and its ION® range of software and metering products
Brings together two global leaders in power and energy management
Makes Schneider Electric the world’s largest provider of energy efficiency, power quality and reliability solutions
PowerLogic® range now includes ION technology