1. Document Camera Setup Instructions

2. Contents: 1. Remote 2. Power Cord 6. Anti-Glare Shield 3. VGA Cable
5. Pink Plastic Tub and Lid
4. Document Camera

3. Step 1: Place document camera on computer cart.

4. Step 2: Attach VGA cable to blue plug on back of Document Camera and to the 2nd “Computer In” plug on the back of the projector.
VGA Cable

5. Step 3: Attach Power Cable to Document Camera and plug into available outlet on computer cart.

6. Step 4 Turn the projector on by pressing the “Power” button.

7. Step 5 If the Document Camera is not displayed, click the “Source” button on the projector until you see the correct display.

8. Step 6 Place item to be displayed under camera
Step 6 Place item to be displayed under camera. Use wheel to “zoom in” or “zoom out” as necessary.

9. Step 7 If glare occurs on document, place “Anti-Glare Sheet” on top of the document.

10. Step 8 Replace all materials in the pink plastic tub.