1. 2. ATP INITIALIZATION PLACE ATP SWITCH TO “1” OR “NORMAL” POSITION A
CHECK IF DIAGNOSTIC PANEL IS ON
PUT THE HAND CONTROLLER SWITCH TO “ON” POSITION X NO
YES
LINE CONTACTOR CLICKED
WHEN “WAIT” INDICATION APPEARS ON THE DISPLAY PANEL, HOLD THE HAND CONTROLLER SWITCH TO “MODE 1” X NO
YES
START-UP TEST CODES ( ) ARE DISPLAYED
WAIT UNTIL ALL TESTS PASSED X NO
YES
WHEN ATP TEST SYMBOL IS DISPLAYED AND THE ALARM SOUNDS, PRESS “TEST” BUTTON ONCE A
ATP DISPLAY BECOMES DARK, ALARM SOUND INCREASES GRADUALLY UNTIL IT TURNS OFF
TURN OFF TRAIN AND WAIT FOR 15 SECONDS
“TEST” BUTTON PRESSED WITHIN
4 SECONDS
PRESS “TEST” BUTTON AGAIN NO X
YES
“START 15” IS DISPLAYED ON THE ATP SCREEN
TRAIN IS READY FOR DEPARTURE