1. Understand Accuracy and Precison
Honors Physics Learning Standard:
Scientific Processes 1.a. to 1.d

2. Accuracy and Precision
Much of science has to do with the collection and manipulation of quantitative or numerical data.
The value of computations using numerical data is greatly dependent on the accuracy and precision of that data.

3. Exact Numbers Discrete Data Obtained when you count objects
2 soccer balls
60 BB’s
1 watch
4 pizzas
Obtained from a defined relationship
1 foot = 12 inches
1 meters = 100 cm
Not obtained with measuring tools
We will later learn that these numbers do not limit the number of significant figures reported.

4. Measured Numbers
When you use a measuring tool to determine a quantity such
Your height
Volume of a liquid
Time to run a mile
the numbers you obtain are called measured numbers.

5. Accuracy Example: Liquid Volume

6. What is the smallest unit you can measure from each of these Graduated Cylinders?
Each mark is 1 mL apart so it is calibrated to 1 mL.
Each mark is 0.2 mL apart so it is calibrated to 0.2 mL.

7. What is the correct reading for each one?
20.60 mL
22.5 mL

8. What is the correct reading for each one?
20.60 mL
22.5 mL
Since the calibration of the GC on the left is finer, the reading from the GC on the left has more significant digits to show how sure you can be about your measurement.

9. Accuracy and Precision
There is always some degree of ERROR in a measurement. This is due to:
Precision of the Equipment
Accuracy of the Measurement
22.5 mL
20.60 mL

10. ACCURACY Accuracy is how close a number is to what it should be.
determined by comparing a number to a known or accepted value.

11. PRECISION
Precision is how close repeated (successive) measurements are to each other.
It is sometimes defined as reproducibility
Precision is shown by the number of decimal places assigned to the measured number.
The precision of a value determines the number of significant figures.

12. Both Accuracy and Precision depend
on the calibration and the quality of the measuring tool.
On the competence of the scientist taking the measurement.

13. Accuracy and Precision
Accuracy and precision can not be considered independently
A measurements can be accurate and not precise
A measurements can be precise and not accurate

14. Example 1: Calibration: Years How old are you? I am 16 years old
I am 15 years, 8 months old
I am 15years, 8 months, 5 days old
I am 15 years, 8 months, 5 days, 10 hours old
Calibration: Hours
Each of these statements is more accurate and more precise than the one before it.

15. Example 2: How long is a piece of string?
Johnny measures the string at 2.63 cm.
Using the same ruler, Fred measures the string at cm.
Who is most precise?
Who is most accurate?
The actual measurement is 2.65 cm.
Johnny is fairly accurate and also very precise.
Fred is very precise, however, he is not very accurate. His lack of accuracy is due to using the ruler incorrectly.

16. Example 3 Using a centigram balance, Mary measured a sample at 3 g.
Ashley measured the same sample at 3.00 g.
Who is most precise?
Who is most accurate?
The actual measurement is 3.01 g.
Mary is reasonably accurate. She was not very precise because the balance was capable of measuring to two decimal places.
Ashley is much more accurate because of the precision of her measurement and closeness of her value to the actual value.

17. ACCURACY/PRECISION
You can tell the precision of a single measurement simply by looking at it. The number of decimal places gives the precision of the reading.
The precision of a group of readings depends on how close the readings are to one another.
Accuracy on the other hand, depends on comparing a number to a known value. Therefore, you cannot simply look at a number and tell if it is accurate

18. In Conclusion
In science we depend upon both the accuracy and precision of the numbers we use.
It is vital to recognize that the number of digits communicates accuracy and precision.