Download presentation
Presentation is loading. Please wait.
1
Charging System Process Map
2
System Notes: D.C. ~ Duty Cycle = (% of ON-Time)/(Total Time)
Constant Current ~ Still Need to find out how to electrically determine a batteries C-Rate. C-Rate ~ Capacity of a batter in an hour. Determines which rate to constantly charge battery.
3
Main Power ON Wall Outlet Arduino Turns ON Below 100 C
Detect Temperature YES Bluetooth Activates SSR Signal ON Activate Buttons Turn On LCD Power Push Button NO YES Show Home Screen To Voltage Select: Next Slide
4
Apply Constant Current Apply Constant Current
Check Voltage Voltage Select Check Voltage AT I2V AT V Set Duty Cycle to 10% Set Duty Cycle to 40% Apply Constant Current Apply Constant Current Monitor Current Until Near 33.33% of Original Level Monitor Current Until Near 33.33% of Original Level Turn SSR OFF Turn SSR OFF To Check Voltage: 24V To Check Voltage: 36V Next Slide
5
Apply Constant Current Apply Constant Current
Check Voltage Check Voltage AT V AT V Set Duty Cycle to 20% Set Duty Cycle to 30% Apply Constant Current Apply Constant Current Monitor Current Until Near 33.33% of Original Level Monitor Current Until Near 33.33% of Original Level Turn SSR OFF Turn SSR OFF
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.