1. “DESIGN AND FABRICATION OF ROTARY SHEARING MACHINE”
A PROJECT REPORT ON
“DESIGN AND FABRICATION OF ROTARY SHEARING MACHINE”
SUBMITTED BY
SHIVAM MISHRA
NAVEEN MISHRA
ANOOP KUMAR YADAV
AWADHESH PRATAP SINGH
14BTMECH149
14BTMECH090
14BTMECH101
14BTMECH095
under the guidance of
Dr. L P SINGH
(Assistant Professor)
Department of Mechanical Engineering

2. OBJECTIVEs To Design and Fabricate a Rotary Shearing Machine.
To test the fabricated Rotary Shearing Machine.
To perform multiple operations.
2/20/2018
GROUP NO. 6

3. INTRODUCTION
Shearing is defined as operation which is used to cut sheets of metal into smaller pieces without forming chips.
Cutting can be easily performed with accuracy.
The machine is manually operated and can easily cut the long sheets.
2/20/2018
GROUP NO. 6

4. ASPECTS OF PROJECT Shaft Bed Rotary Cutter Manually Operated Handle
Dies
Housing Bearings
Nuts & Bolts
Frames
2/20/2018
GROUP NO. 6

5. advantages It is manually operated and not require electric power.
Multiple operation can be performed.
Less maintenance cost.
It can be easily moved from one place to another.
2/20/2018
GROUP NO. 6

6. disadvantages It cannot cut material more than 5 mm thickness.
Operator is required to perform operations.
Time loss on changing dies.
2/20/2018
GROUP NO. 6

7. THANK U
2/20/2018
GROUP NO. 6