1. Specific heat capacity

2. Starter: what are these words
Nitccnooud
Ahte
Ciifcpeeetlsaattn
Darnoitai
Ecovnncoit
pumeetreart

3. Learning outcomes Recall key words
Determine the safe procedure to carry out the practical
Evaluate your results

4. Specific heat capacity
E = mass x SHC x change in temperature Mass = 1kg SHC Al = 900J/kg0C SHC Cu = 385J/kg0C

5. Specific heat capacity practical
Equipment

6. Method
Set equipment up, making sure to connect the power to the immersion heater
Set the power pack to 12v
Record the start temperature
Turn the power on for 5 minutes, then switch power off
Record the highest temperature reached
Share results

7. Results table

8. Results table Material Temperature at start 0C Temperature at end 0C
Temperature difference 0C

9. Specific heat capacity
E = mass x SHC x change in temperature Mass = 1kg SHC Al = 900J/kg0C SHC Cu = 385J/kg0C So how much energy was used to heat your block? Was it different to another groups? Evaluate your practical.

10. Homework: due 9th September
In your books or on paper or on the computer draw a poster that explains the following key ideas: heat, temperature, specific latent heat and specific heat capacity.
You must include an image for each key idea
You must in your own words explain what these words mean

11. heat temperature Specific latent heat
gdahcgakfaghfjkasegfiawegfiaweasdhjgwegwuosdhhakhohuohuoh
temperature
Sdjkvh;vohovhwowosv#shuowVdbnvkvhjsdvhhvjhvvvsovvhivhvhwvhvhvhvhvh
Specific latent heat
Gibgjovlhi sdjlwlvjvjvjvjvhhh
Vhohvovfovhovh hhvvv vvhvvhhhvuviyruifhe7hvuvj