1. lesson 4.1 MIRROR USAGE AND BACKING PROCEDURES
Drive Right chapter 4
Sunday, May 12, 2019
lesson 4.1
MIRROR USAGE AND BACKING PROCEDURES
Using mirrors effectively is essential for getting timely and accurate information about conditions behind your vehicle.
Backing is a high-risk maneuver.
The copyright holder has not granted permission to display this photograph in a downloadable format. You may view the photograph in the Drive Right Presentation for this lesson on your Keys to Teaching Success disc.
Version 2

2. Explain when the rearview and outside mirrors should be checked.
OBJECTIVE

3. Mirror Usage
There are three mirrors that come as standard equipment on most vehicles:
the inside rearview mirror
two outside mirrors
In addition, convex mirrors can be added to help compensate for blind spots.

4. Inside Rearview Mirror
Check the inside rearview mirror when you see something in the path you intend to travel.
Check before and after making a turn at an intersection.
Check before and after passing another vehicle.
Check the mirror before and after making a lane change.
Make two or three quick mirror checks rather than one prolonged check.

5. Outside Mirrors
Before moving the vehicle to either side, check the outside mirror on the side to which you will be moving.
To check for a vehicle in the mirror’s blind spot:
look over your shoulder in the direction you wish to move
move your head forward while checking the outside mirror

6. Explain what a convex mirror is and how it can be used to eliminate blind-spot areas.
OBJECTIVE

7. Convex Mirrors
The surface of a convex mirror is curved outward like the exterior of a ball, which allows a wider view of the area to the side and rear of the vehicle.

8. Explain why backing is a high-risk maneuver, and how to minimize the risk.
OBJECTIVE

9. Backing
Backing is a high-risk maneuver because drivers cannot see behind their vehicles.
Obstructions lying on the pavement can go undetected.
Always walk to the rear of the vehicle before getting into it to check for a safe path for the tires to travel.

10. List the steps for safely backing a vehicle.
OBJECTIVE

11. Steps for Backing Safely
Place your foot firmly on the brake, and shift into REVERSE.
Use a target to aim the car toward. Look over your right shoulder to see your targeting path.
Check all three mirrors in addition to looking over your shoulder.
Travel no faster than a crawl by slightly releasing brake-pedal pressure.

12. Backing Straight
When backing straight, put your left hand on the steering wheel at the 12:00 position.
Move the top of the steering wheel in the direction you want the back of the vehicle to go.

13. Backing Left or Right
When backing left or right, start with both hands on the wheel.
Pull the wheel from the top down in the direction you want the back of the vehicle to go.
Be sure to check not only the rear as you back but also the swing of the front of the vehicle before turning takes place.

14. lesson 4.1 review
How can a convex mirror improve your rearview checks?
What outside checks should you make before backing any vehicle?