Presentation is loading. Please wait.

Presentation is loading. Please wait.

FILLING AND VIBRATING DRY CAST BOXES

Published byΔιογένης Γαλάνης Modified over 5 years ago

Similar presentations

Presentation on theme: "FILLING AND VIBRATING DRY CAST BOXES"— Presentation transcript:

1 FILLING AND VIBRATING DRY CAST BOXES
January 15-18, Murfreesboro, Tennessee By Tom Umek

2 What kind of equipment and working conditions make for happy production workers?
Rigid Rugged Resilient

3

4 First things first….do the cages fit?
Rigid Rugged Resilient

5

6 What about our supply of concrete?
Rigid Rugged Resilient

7

8 Preparing for the pour Rigid Rugged Resilient

9

10

11 What’s left in the mixer, on the belt or in the hopper?
Rigid Rugged Resilient

12

13

14 Filling haunches on the boxes
Rigid Rugged Resilient

15

16

17 Know what your slump is….yes slump, on Dry Cast Concrete
Rigid Rugged Resilient

18

19 Correct fill rates to insure correct and complete consolidation
Rigid Rugged Resilient

20

21 Fill in 4-6” lifts Slow down in the haunches to allow consolidation Insure consolidation by seeing the sheen near the core and jacket

22 Don’t feel you have to run all vibrator at the same time
Start the vibration with 12-18” in the bottom of the form When filling is near the next row of vibrators turn them on Once nearly full, turn of the bottom vibrators off.

23 QUESTIONS ? Rigid Rugged Resilient

Download ppt "FILLING AND VIBRATING DRY CAST BOXES"

Similar presentations

PREPOSITIONS OF PLACE WHERE? IN BEHIND ON BETWEEN UNDER NEXT TO

PREPOSITIONS OF PLACE WHERE? IN BEHIND ON BETWEEN UNDER NEXT TO
CASTING A CONCRETE WALL

CASTING A CONCRETE WALL
CHDD BOL Equipment Primer Rooms CD 326 & CD 391 Behavioral Evaluation Center Behavior Observation Laboratory.

CHDD BOL Equipment Primer Rooms CD 326 & CD 391 Behavioral Evaluation Center Behavior Observation Laboratory.
Salk Institute Mobile Lab Gel Electrophoresis Teacher Instructions Edvotek Set Up 12 groups.

Salk Institute Mobile Lab Gel Electrophoresis Teacher Instructions Edvotek Set Up 12 groups.
Concrete Box Culverts (CBC)

Concrete Box Culverts (CBC)
RIGHT HAND CARTRIDGE UNIT AS CAN BE SEEN FROM THE PHOTOGRAPH,THE UNIT IS OFFERED UP TO THE END OF THE BED AND MARKED THROUGH AT LEAST THREE POINTS FOR.

RIGHT HAND CARTRIDGE UNIT AS CAN BE SEEN FROM THE PHOTOGRAPH,THE UNIT IS OFFERED UP TO THE END OF THE BED AND MARKED THROUGH AT LEAST THREE POINTS FOR.
Problem of the Day Problem of the Day next Geometry - Connect the Dots 82 - 83.

Problem of the Day Problem of the Day next Geometry - Connect the Dots
Salk Institute Mobile Lab Gel Electrophoresis Teacher Instructions BioRad Set Up 8 groups Grossmont Kit.

Salk Institute Mobile Lab Gel Electrophoresis Teacher Instructions BioRad Set Up 8 groups Grossmont Kit.
11 Heating System Operation and Diagnosis.

11 Heating System Operation and Diagnosis.
DL – Liquid Filling System The DL – Liquid Filling System is just one example of the equipment we design and manufacture for specialty applications.

DL – Liquid Filling System The DL – Liquid Filling System is just one example of the equipment we design and manufacture for specialty applications.
RADARTRON by SCALE-TRON. WHY DO WE NEED MOISTURE MEASUREMENT? Wet cast – measurement in sand corrects both sand weight and water Wet cast – measurement.

RADARTRON by SCALE-TRON. WHY DO WE NEED MOISTURE MEASUREMENT? Wet cast – measurement in sand corrects both sand weight and water Wet cast – measurement.
© the Design and Technology Association Health and Safety Training Standards in Design and Technology S3HS CASTING NON-FERROUS METALS Specialist Extension.

© the Design and Technology Association Health and Safety Training Standards in Design and Technology S3HS CASTING NON-FERROUS METALS Specialist Extension.
How To Bake A Cake Kayla Golack Period-9 2-11-08 Exer03.

How To Bake A Cake Kayla Golack Period Exer03.
UNIT: CONCRETE/MASONARY

UNIT: CONCRETE/MASONARY
CRAFT & DESIGN CASTING The process of sand casting involves taking a wooden pattern of the thing you want to create in metal, placing it in a box of sand,splitting.

CRAFT & DESIGN CASTING The process of sand casting involves taking a wooden pattern of the thing you want to create in metal, placing it in a box of sand,splitting.
Vibration study report 4/10/2013 LCLS-II Physics meeting A. Lutman, J. Turner.

Vibration study report 4/10/2013 LCLS-II Physics meeting A. Lutman, J. Turner.
The Peace of Mind Dog Care SYSTEM V 1.0 Aaron Humphrey EKU, Dept. of Technology, CET.

The Peace of Mind Dog Care SYSTEM V 1.0 Aaron Humphrey EKU, Dept. of Technology, CET.
On most construction sites, materials such as gravel, sand and fill dirt must be brought in, while waste materials such as old bricks and excavated dirt.

On most construction sites, materials such as gravel, sand and fill dirt must be brought in, while waste materials such as old bricks and excavated dirt.
From

From
Su Doku!. Given a grid and some numbers, fill the rest in… 1 2 4 6789 They might be in the wrong order… 6421953.

Su Doku!. Given a grid and some numbers, fill the rest in… They might be in the wrong order…

Similar presentations

Ads by Google