1. PowerLogic PM5350 High-performance multifunction power meter
For entry-range metering applications

2. A high-performance multifunction power meter for the entry-range meter market
The PowerLogic PM5350 provides you with a superior entry-range power meter for demanding applications where accuracy is paramount.
This user-friendly meter offers the perfect balance of price, features and performance.

3. Offer overview PM5350 meter to monitor and control main feeders:
PM800 series
for incomers or critical feeders
PM1000 series
for basic feeders
PM5350 meter to monitor and control
main feeders:
Accurate and complete measurements
Alarming for key parameters
Breaker status monitoring and control
Embedded serial Modbus communication

4. Applications Panel instrumentation Energy management
Sub-billing and cost allocation
Electrical installation remote monitoring
Circuit breaker monitoring and control

5. Features Comprehensive measurement package
Energy and demand monitoring
THD/TDD & Min/Max reading
Pre-configured alarm functions for more than 30 conditions
Time stamp & internal time clock
4 digital inputs for circuit breaker status indication
2 relay outputs for circuit breaker control
Active Energy compliant with IEC class 0.5S
Temperature range confirmed with IEC standard
Modbus RS-485 communication port
Sealable features (V,I)

6. Easy operation
Intuitive navigation with self-guided, language selectable menus
Language customization (English & simplified Chinese)
Bright, anti-glare dot matrix display (backlit)
Summary screens with multiple values
Front panel LEDs provide at-a-glance information
Orange LED (configurable) w/ 3 modes: Off, Alarm, Energy pulses
Green LED w/ 2 modes: Off, Diagnostic
Two meter reset levels (global, single parameter)
Makes commissioning faster and easier

7. Easy installation Mounting clips (2) hold the meter in place
No other tools required
Ultra compact (44mm depth)
Save valuable space
Connectable up to 480 V L-L without PTs
For installations compliant with category III
Wetted digital inputs
No needs of external power supply
Clear identification for all connections
Electrical drawings on the meter itself
Green connector for communications
Avoid mistaking it for the power supply

8. Alarming 29 standard alarms to cover most common needs 4 unary alarms
Pickup magnitude and delays
Dropout magnitude and time delays
4 unary alarms
Power up, meter reset, self-diagnostic, phase reversal
4 digital input alarms
Association alarm – D/O possible
4 levels of priority (None/Low/Med/High)
40 alarms saved in non volatile memory
Alarm counter to measure occurrence
Alarm time-stamped (1s)

9. Specifications & dimensions
15 pre-defined system configuration types for 4, 3 or 2 wires
Data Update: 1 s nominal (50/60 cycles)
Input Voltage:
20 to 690 V AC L-L
20 to 400 V AC L-N
Input Current: Through CTs
CT primary: 5A A
CT secondary: 5 A nominal
Burden: < VA at 9 A
AC control power: V ac
DC control power: V dc
Temperature:
Operating: -20 °C to +70 °C
Storage: -40 °C to +85 °C

10. Measured parameters / accuracy ratings
Instantaneous measurements
Accuracy
Min/Max
I1,I2,I3,In
± 0.24% from 0.5 to 9.0 A ü
U1,U2,U3,V1,V2,V3
± 0.30% from 65 to 347 V ac F
± 0.03% from 45 to 70 Hz
PFtot, DPFtot,
PF1, PF2, PF3, DPF1, DPF2, DPF3
± 0.50%(Signed)
Ptot, Qtot, Stot,
P1, P2, P3, Q1, Q2, Q3, S1, S2, S3
± 0.36%(P-Q Signed)
THD / thd I1, I2, I3, In,
THD / thd V1,V2,V3,U1,U2,U3
TDD ?
Unbalance I, V, U

11. Measured parameters / accuracy ratings
Energy†
Accuracy
NV Memory
Active
IEC Class 0.5S ü
Reactive
IEC Class 2
Apparent
± 0.5%
† Capacity of counting ~ 9,2 x 10 ^ 6 Twh or ~ 11 years at 480VL-L / 1000 A
Demand
Power
Type‡
Peak D/T
NV Memory
Active
Total ü
Reactive
Apparent
Current
Average
‡ Demand calculations are Sliding, Fixed and Rolling bloc; and Thermal for current only

12. Additional measurements
Load timer with adjustable settings
With Low set up calculates total operating feeder time
Beyond nominal current settings calculates the overload time
Digital Input/Output timers
Measurement in (s) for Time On

13. Standards compliance Accuracy
Class 0.5S for active energy according to IEC
Class 2 for reactive energy according to IEC
IEC
PMD /S/K70/0.5
Safety
CE as per IEC
cULus as per UL61010
Mechanical characteristics according to IEC 60529
IP degree 51 for front of meter
IP degree 30 for meter body

14. Standards compliance Electromagnetic compatibility
Electrostatic Discharge Level III (IEC )
Immunity to radiated fields Level III (IEC )
Immunity to fast transients Level III (IEC )
Immunity to impulse waves Level III (IEC )
Conducted immunity Level III (IEC )
Immunity to magnetic field Level III (IEC )
Immunity to voltage dips Level III (IEC )
Conducted and radiated emissions CE commercial environment / FCC part 15 EN55011 Class A
Harmonics IEC
Flicker emissions IEC

15. Environmental friendly
RoHS Compliant
Low energy consumption
Possibility to turn off Display and backlit
Consumption typical 2 Watts
ISO plant manufactured

16. For more detailed information on this product, or other products, services and solutions
Ask your Schneider Electric representative
Visit