1. Engine Mount Assembly
Rockets

2. Supplies:
-Elmer’s glue
-Strips of paper
-Wood plug
- Engine lock

3. Steps:
Roll the strips of paper around the plug and glue
each piece to one another. Do not glue paper
to the plug! Try to keep one end even.

4. Steps:
2) Continue to roll and glue papers until the you are
nearly to the same size as the Airframe. When
you reach this point, glue the engine lock in place.

5. Steps:
3) With the engine lock in place, continue to roll the
papers until it slips inside the Airframe with
some drag. With this complete, glue the engine
mount in place inside the Airframe with Elmer’s.

6. Resources: http://www.estesrockets.com http://www.pitsco.com