1. Champion RotorChamp 5 - 20 HP

2. New Gardner Denver Product Plan
In 2005, Gardner Denver acquired Bottarini S.p.A. located in Milan, Italy
Founded in 1952, they are a manufacturer/assembler of reciprocating and rotary screw compressors
They have an extensive line of lubricated rotary screws
Package airends are the same reliable Enduro airends as used in many of the current Gardner Denver products

3. Why Bottarini? Proven compressors from a “Packaging Expert”
A reliable product at a lower cost

4. Scope of Products
5 to 20 HP
Air-cooled only - oilcooler and after-cooler
Compact size - fully enclosed
All V-belt driven units
All base mounted
Microprocessor “Easy to Use” controllers
Aeon 4000

5. Product Features Vertical Draft Coolers Discharge
Removable Panels for Easy Access to Service Points
IP 54 rated enclosure - dust protection and protection from splashing water
Electrical Wiring Inlet
Suction Air Into Package
Main Power Switch
Small-Compact Footprint

6. The RotorChamp Airend -
Proven the World Over!

7. Product Features Dependable Enduro Airends!
V-belt drive with integral belt tensioning devices
All units will have an
IP 54 rated enclosure - dust protected and protection from splashing water
Pressures available , 125, 150, 175 PSIG

8. Product Features
TEFC motors are standard - a tropical motor with an IP 55 rating/Class F Insulation
Voltages - all models:
200 Volt, 230 Volt, 460 Volt and 575 Volt - all 3 phase
Also 230 Volt - 1 phase
5 and 7.5 HP
RotorLub 4000

9. Product Features Spin On Lubricant Separator Inlet Valve and Filter
Adjustable Belt Tensioning Device
Spin on 30 Micron Full Flow Oil Filter
Dependable Enduro Airend
Lubricant Reservoir with AEON 4000
RotorLub 4000
TEFC Motor with Pulley
Lubricant Level Sight Tube

10. Competitive Sound Levels
5 HP - 69 dBA
7.5 HP - 70 dBA
10 HP - 71 dBA
15 HP - 74 dBA
20 HP - 74 dBA
Acoustical Foam

11. Product Features
Base mounted will be standard with the moisture separator/trap shipped loose
Optional receivers available:
80 gallon for the HP
120 gallon for the 15 and 20 HP
An Auto Receiver Condensate
Drain is available
Vertical Draft Coolers

12. Product Features
Starters will be Direct Only - “full voltage-across the line” on the HP models
No other starter options will be offered
An optional Auto Receiver Condensate Drain will be available

13. Product Features
Microprocessor control panels with digital display as well as a pressure gauge
The compressor will be regulated as a start/load/no-load/timer off control

14. On/Off, Alarm LED, Rotation LED, Power LED, Temperature LED, Hours LED
Control Panel
On/Off, Alarm LED, Rotation LED, Power LED, Temperature LED, Hours LED
Will provide shutdown alarms and warnings
Will provide factory programmed maintenance advisory alerts on the LED display
Off Button and E-Stop

15. Shutdown Alarms - “A” Shutdown Alarms Displays
A 01 Shutdown for high oil temperature
A 03 Shutdown for high motor amperage
A 04 Reverse rotation alarm, phase loss or voltage drop
A 07 Temperature probe failure - low ambient <- 50°F alarm
a 01 Pre-alarm - inlet filter change warning
a 02 Warning: compressor is waiting to start after a stop
a 03 Pre-alarm: a temperature of 215°F has been reached

16. Maintenance Warnings - “S”
Maintenance Warning Displays
S hours before oil change
S hours before inlet filter change
S hours before oil filter change
S hours before oil separator change
S hours before general maintenance

17. Product Features Compressor Discharge Heavy Duty 8 Micron Inlet Filter
30 Micron Spin on Oil Filter
Oil Reservoir and Site Tube

18. Product Benefits Summary
Dependable Enduro airends
Tank mounted options
Microprocessor controls
Competitive noise levels
Lower price

19. Execution Process Phase One: 5 through 20 HP
10 through 20 HP are in stock and ready to ship
5 and 7.5 HP shortly thereafter
Marketing materials are available
Planned overlap with current products
Over 200 units for the HP group are available now!
Orders have been placed for the 5 and 7.5 HP units - due to arrive in September
MOST IMPORTANTLY - List prices are 5% - 10% below current levels

20. Other Issues
Future product plans include an “Air System” that would include the air compressor, a refrigerated dryer and an air receiver
Configuration to be determined - horizontal tank mounted or base mounted with a vertical receiver
Product Overlap
There will be a well metered “phase out” process of existing products which will prevent product availability gaps