1. JUMBO design NEW Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

2. JUMBO combiline – new design
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

3. JUMBO Pick-up
NEW
8-row pick-up for all JUMBOs – increase in performance +20%
Optimised transition from pick-up tines to rotor
Reduced maintenance
Enlarged Pick-up drum diameter for optimised crop flow
+ 6 % higher pick-up speed
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

4. Pick-up roll JUMBO combiline
NEW
New optimised Pick-up roller mm on JUMBO combiline
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

5. Low-slung drawbar 3 (4) t NEW JUMBO combiline: JUMBO:
standard 3 t
on demand 4 t
JUMBO:
on demand 3 t wheelbase
on demand 4 t wheelbase
Replaces old 3 tonne drawbar
New optimised shape
Tighter turning angle thanks to narrower design
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

6. Presse vorne mit Pick-up
Stronger drive system
NEW
Reinforced and tested driveline
Overload protection 2500 Nm Powerline PTO shaft from Walterscheid
Tecnical features of the new PTO 2500:
Service Plus System
Lubrication intervals 60h
NEW PTO shaft protection with chain only on one side on machine
Torque protection 2500 Nm
4-fold cam clutch
Neues Bild Alois Mair
Presse vorne mit Pick-up
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

7. Discharging
NEW
Discharge overload torque limit increased from 1200 Nm to 1500 Nm (+ 25% higher unloading performance)
New beater shape (twist design) – delivers higher performance
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

8. Electronics NEW NEW: inductive sensors * (contact-free switches)
* tougher
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

9. JUMBO operator terminal – Power Control New
Power Control as standard equipment with night design and keypad with raised "click" keys for even better operation
NEW
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

10. Tridem lifting axle NEW Lifting axle available
Operated using additional single-acting valve
If the load is too heavy (pressure sensor) the axle automatically moves downwards – protects against overloading
Display on operator panel indicates when axle is lifted  
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

11. Tridem axle unit 26.5" NEW Available from JUMBO 7210
27 tonne axle load
Brake pads 410 x 180 mm
710/50R26.5 tyres
800/45R26.5 also available
Lifting axle available
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019

12. JUMBO 7210/10010 combiline – 6 chains
NEW
6 scraper floor chains; hydraulic flowrate 130 l/min.
Unloading speed  up to 40 % faster
Alois Pöttinger Maschinfabrik GmbH
Sonntag, 02. Juni 2019