1. Unity Application Generator
Developing Structure
Form to be used: SF3

2. Developing a structure in Unity
Derived Data type
Structure can be defined in Unity under Derived Data type
By clicking on the editor, new structure can be inserted.
Under the PLUS sign, new variables can be inserted

3. Developing a structure in Unity
After the structure is defined, then the program has to be to BUILT using build tab.
A built Structure should be placed in library using PUT IN LIBRARY function.
The software will ask about the location: select appropriate location

4. Developing a structure in Unity
The structure can be exported using EXPORT command
Save at appropriate location: the extension is *.xdd

5. Developing a structure in SCoD editor
In SCD Editor, open the library where this structure has to be placed.
In SCD Editor, open the library where this structure has to be placed.
Select the right structure exported from Unity

6. Developing a structure in SCoD editor
After clicking OK to the message window for the name, new structure will be available in SCoD editor .

7. Developing a structure in SCoD editor
Analyze the library and save it. .

8. Summary Developing structure
In Unity:
Structure has to be defined in Derived Data type
Has to be analyzed.
Has to be exported.
Then has to be placed in the library using PUT IN LIBARAY function
In SCoD editor
Structure has to be imported.
Library should be analyzed
Library should be SAVEd.