1. ENGINEERING
GRAPHICS
PDT 106
Semester 1 (2016/2017)

2. GENERAL COURSE INFORMATION

3. GENERAL COURSE INFORMATION
CODE & NAME : PDT106 Engineering Graphics
UNITS : 3
CONTACT HOURS : 10 hours (Lecture), 84 hours (Lab)
GROUPS : 1 group
COURSE OUTCOME :
1. Ability to apply the basic drafting, sketching engineering components and common term used in engineering drawing.
2. Ability to apply orthographic, auxiliary, sectional, and isometric view in engineering drawing.
3. Ability to apply and analyse geometric, dimensioning, and tolerancing (GDT) in engineering drawing.
4. Ability to apply detail and assembly drawing in engineering drawing.

4. GENERAL COURSE INFORMATION
LECTURER’S CONTACT DETAILS (RY58):
MUHAMAD QAUYUM ZAWAWI BIN AHAMAD SUFIN
Block S2, Door 9 (in front of BK8)
LECTURE & TUTORIAL NOTES:
Students may download all lecture and tutorial notes in the online system.
Go to
Log in the portal by keying in your username and password.
Click “Lecture Notes” tab.
Click “Jabatan Teknologi Kejuruteraan Mekanikal”.
Click “ENGINEERING GRAPHICS (PDT 106) 2016/2017”.
Select files to download.

5. GENERAL COURSE INFORMATION
GRADING POLICY :
Lab (50%)
Midterm Test (20%)
Mini Project / Mini Integrated Project (30%)
REFERENCES :
Textbook – Frederick E. Giesecke, Henry Cecil Spencer, John Thomas Dygdon, Alva Mitchell, Ivan Leroy Hill, James E Novak, “Technical Drawing”, 10th Edition, Prentice Hall, 2002.

6. GENERAL COURSE INFORMATION
DRAWING TOOLS SET:
All students must have at least one full set of drawing tools. The list of drawing tools is as follow: NO
ITEM
UNIT 1
STEADLER 2B PENCIL 2
STEADLER 4H PENCIL 3
SET SQUARE 4
COMPASS 5
A3 PAPER 20 SHEETS 6
MASKING TAPE 7
T-SQUARE 8
SAND PAPER 9
ERASER TEMPLETE 10
FRENCH CURVE 11
PLASTIC STRAIGHT RULER 12
DUST FREE ERASER 13
*DRAWING BOARD
Including drawing board = RM 64
Excluding drawing board = RM 50

7. GENERAL COURSE INFORMATION
WEEKLY TIMETABLE:
MONDAY : 4.00 P.M P.M
: DRAFTING LAB (FTKM, UNICITI) / MCP9
WEDNESDAY : 8.30 A.M P.M

8. CUTI PERTENGAHAN SEMESTER/MID SEMESTER BREAK
WEEKLY TEACHING PLAN & ACTIVITY:
StudyWeek
Course Content
WEEK 1
(5/9/2016 – 9/9/2016)
LAB 1 : Introduction to basic Engineering Drawings
DEFINE, DESCRIBE, EXPLAIN and APPLY the objectives and importance of engineering drawing, sketching technique, technical drawing tools, drafting standards, title block and texts, measurement and scales, drawing out difference types of standard sketches, lettering and numbers, and laying out drawing sheet and boundary lines.
WEEK 2
(12/9/2016 – 16/9/2016)
LAB 2 : Geometric Construction in Engineering Drawing
DEFINE, DESCRIBE, and APPLY method of drawing line in difference type and angle, drawing in simple geometrical shape, drawing lines and arcs tangent to each other, dividing a line and space into equal part and dividing an angle in half.
WEEK 3
(19/9/2016 – 23/9/2016)
WEEK 4
(26/9/2016 – 30/9/2016)
LAB 3 : Multiview Projection in Engineering Drawing
DEFINE, DESCRIBE, and APPLY the orthographic projection, first angle projection, third angle projection and isometric projection.
WEEK 5
(3/10/2016 – 7/10/2016)
LAB 4 : Technical Sketching in Engineering Drawing
DEFINE, DESCRIBE, and APPLY the isometric and oblique sketching, and standard practices.
WEEK 6
(10/10/2016 – 14/10/2016)
LAB 5: Sectional view in Engineering Drawing
DEFINE, DESCRIBE, and APPLY the Cross-sectioned views and symbols, cutting plane or sectioned plane. APPLY and ILLUSTRATE types of cross-sectioned views-half sectioned and full sectioned views.
WEEK 7
(17/10/2016 – 21/10/2016)
LAB 6: Geometric Dimensioning and Tolerancing (GDT)
DESCRIBE and APPLY the dimensioning notations, dimensioning theory, dimensioning location systems, universal dimensioning standard, and calculating tolerance.
WEEK 8
(24/10/2016 – 28/10/2016)
CUTI PERTENGAHAN SEMESTER/MID SEMESTER BREAK

9. WEEKLY TEACHING PLAN & ACTIVITY:
(31/10/2016 – 4/11/2016)
LAB 7 : Introduction to CAD
DESCRIBE and EXPLAIN the meaning and advantages of Computer Aided Drafting (CAD), basic drawing, editing and toolbar for AutoCAD Software.
WEEK 10
(7/11/2016 – 11/11/2016)
LAB 8 : Geometric Construction in CAD
EXPLAIN and APPLY the coordinates system, drawing and editing command, and dimensioning in AutoCAD.
WEEK 11
(14/11/2016 – 18/11/2016)
LAB 9: Basic 3D Construction (CAD)
DESCRIBE, EXPLAIN and APPLY 3D coordinate systems, user coordinates system, using the solids toolbar, using the view toolbar, using view point, creating solid models with extrude and revolve, extruding a shape, using Boolean operations, creating solid models revolution.
WEEK 12
(21/11/2016 – 25/11/2016)
LAB 10: Multiview Projection in CAD
DESCRIBE, and APPLY how to convert a solid model (3D) to a multiview drawing using solview and soldraw.
WEEK 13
(28/11/2016 – 2/12/2016)
LAB 11: Sectional view in CAD
DEFINE, DESCRIBE, and APPLY the Cross-sectioned views and symbols, cutting plane or sectioned plane. APPLY and ILLUSTRATE types of cross-sectioned views-half sectioned and full sectioned views.
WEEK 14
(5/12/2016 – 9/12/2016)
Mini project
WEEK 15
(12/12/2016 – 16/12/2016) 16
MINGGU ULANGKAJI / REVISION WEEK
PEPERIKSAAN AKHIR SEMESTER / FINAL EXAMINATION