1. easYgen XT Overview
Genset control for multiple unit operation

3. Application Single Unit Mains Parallel Engine start / stop
Generator protection
AMF (auto mains failure)
Generator control
Frequency / active power
Voltage / power factor
Parallel to mains
Full Generator Breaker Control
Full Mains Breaker Control
Update with new picture

4. easYgen-3200XT – Application Examples
Multi Gen Island Parallel
Multi Gen Single Utility Parallel

5. easYgen-3200XT – Application Examples
Backward compatible with non-XT series (CAN load share line)

6. easYgen-3200XT – Differentiation
easYgen-3100XT-P1
easYgen-3200XT-P1
easYgen-3200XT-P1-LT
Integrated Display No
Color LCD
Operating Temperature
-20 to 70 °C
-40 to 70 °C
Freely Configurable PID Controllers 3
Cylinder Temperature Monitoring
Yes
External analog inputs / outputs
16/4
External discrete inputs / outputs
32/32

7. Features – Engine Control
Stop, Manual, Automatic modes
Start / stop by discrete inputs, interface, frontpanel, analog inputs ...
ECU CAN J1939 connection for
Monitoring
Visualization
Control
Override mode for critical operation
Speed sensing/monitoring by MPU
Redundant relay outputs for safety considerations (breaker, gas valves,...) via LogicsManager

8. Features – Engine Control
Crank control and protection
Aux. excitation for alternator via D+ termimal
Aux. services for pre- and postrun
Counters for running hours , service requests,...

9. easYgen-3x00XT Load Dependent Start Stop
Equalize Run Hours
Dynamic Gen-set sorting
The LDSS provides another enumeration for "ID Fit operating hours":
Off
Equal maintenance
Staggered maintenance
Period of use hours (independ. counter)
Introduction of a new parameter: LDSS sort priority always Yes/No
Yes: The sorting in regards of operation time groups, priority and device number is executed always (in reserve power mode)
No: The sorting in regards of operation time groups, priority and device number is executed only, if the load situation causes a new engine constellation anyway.
2 Settings for Reserve Power
In mains parallel mode
In Islanded operation mode

10. Features – Breaker Breaker Breaker modes Synchronization Modes
No breaker, GCB, MCB
Breaker modes
Parallel
Open transition
Closed transition
Interchange (Soft transfer)
External (No breaker ops.)
Synchronization Modes
Phase matching
Slip frequency synch.
Synch. check option
Protection
Synch Time Out
Close Time Out
Open Time Out
Field rotation monitoring
Update template

11. Features – Controllers
Droop can be dynamically activated/deactivated via LogicsManager.
AVR and Governor Control Signals
Frequency
Load sharing
Isochronous
Droop
Voltage
Reactive (var) sharing
Load control
Baseload
Export/Import
Power Factor
Constant
Two setpoints for each controller
Internal setpoints
Interface
Discrete Inputs (discrete raise/lower)
Analog inputs (by mA, by potentiometer)
Bias outputs (for AVR & Governor)
Adjustable analog bias signal between /-20 mA or +/-10 V
PWM output
Relay outputs raise/lower (3-step-Logic)
Analog bias and raise/lower outputs are separately configurable for V, var, f and kW. (=> dual fuel capability)
Update template / three setpoints

12. Features - LogicsManagerTM
Configuration and modification of sequences and operation modes by using logical operators, timers, internal and external status conditions.
Digital Signals
Relay Outputs
Discrete inputs
Relay status
External discrete inputs
External relays
Control messages via CAN, Modbus, …
Assignment
- Operate free configurable outputs
With timer ON-delay and OFF-delay
16 additional/internal flags or logical operations
Internal Conditions
Internal Conditions
Update with new picture from HMI
Conditions - CB status - operating mode - engine status
Alarms - warning alarm - shutdown alarm
Time / Date
Start/stop engine
Change operation mode
Acknowledge of alarms
Inhibit emergency mode
Creating internal flags for cascading multiple dependencies

13. Discrete I/O 12 x Relay Outputs Expansion with external DI/DO boards
Alarm and control
6 single-pole contacts
6 two-pole contacts
Max inductive load
Expansion with external DI/DO boards
Max. 32 DI/32
Woodward IKD 1 or Phoenix IB IL series
12 x Discrete Inputs
Alarm and control (isolated)
Configurables: Timers, alarm classes, text
Update with new HMI picture.

14. Analog I/O I/O Features
Analog Output (#2)
300VAC continuous isolation against ground (preferred for AVR biasing)
Filter Time Constant: 5ms
Analog Inputs support
0-2kOhms senders
0-1V senders
Improved Accuracy (0.5%)
The analog biasing outputs are supported on 2 terminals (Voltage output shunt is internally populated)

15. Analog I/O 2 x Analog Outputs 1 x Auxiliary Excitation D+
Maximum +/- 20 mA or +/- 10 V or PWM (500 kHz)
Preconfigured for speed and voltage bias and configurable as scalable output for measured values (kW) (ext. analog meters)
Change between voltage and current by configuration
11/12 bit resolution
1 x Auxiliary Excitation D+
Input: Sensing and monitoring of excitation voltage
Output: Supplying excitation voltage (via internal shunt resistor)
Update with new HMI picture / clarify the data

16. Voltage measurement
EasYgen allows for different PT connections for generator and mains:
3 phase 4 wire open delta
3 phase 4 wire
3 phase 3 wire
1 phase 3 wire
1 phase 2 wire
For busbar voltage measurement:
Details can be found in the schematics.

17. AC Generator sensing True RMS Voltage sensing True RMS current sensing
400VAC measurement terminals also support 100VAc measurement (the 100VAC connection does not exist anymore)
Frequency measurement
Field rotation detection
Class 0.5 accuracy
Phase-to-Phase measurement
Phase-to-Neutral measurement
3ph3w, 3ph4w, 3ph4w OD, 1ph2w, or 1ph3w
3-phase
Non-returning slave pointer
Class 0.5 accuracy
Power sensing
Class 1 accuracy
True RMS power measuring
Real and reactive power
Power factor
Energy counters Wh and varh

18. AC Mains sensing True RMS Voltage sensing True RMS current sensing
400VAC measurement terminals also support 100VAc measurement (the 100VAC connection does not exist anymore)
Frequency measurement
Field rotation detection
Class 0.5 accuracy
Phase-to-Phase measurement
Phase-to-Neutral measurement
3ph3w, 3ph4w, 3ph4w OD, 1ph2w, or 1ph3w
1-phase
Non-returning slave pointer
Class 0.5 accuracy
Power sensing
Real, reactive and apparent power

19. AC Bus sensing True RMS Voltage sensing
2-phase sensing (phase-to-phase or phase-to-neutral)
Phase angle between mains / bus and generator / bus
Dead bus detection

20. Multiple languages 14 languages standard
No need to flash the unit, languages already present in the firmware
English, Chinese simplified, Portugese, Japanese, Russian, Turkish, Spanish, French, Italian, Swedish, Polish, Slovak, Finnish, German.
Localization tool to flash your own translation
Possibility to create own language
Woodward supplies the tool to do that

21. Localization Tool – Create indiv. HMI Text

22. Change operation modes
LCD
The 320x240 pixel graphic interactive LC display provides soft keys whose functionality changes depending on application and operation.
Delta / Wye Voltage
Alarm Screen
Configure Parameter
Cust. Screen 1
Cust. Screen 2
Additional measured values
STOP
Home screen
Change operation modes
Acknowledge/ reset centralized alarm
Engine start / stop
Breaker control

23. Alarm classes 7 configurable alarm classes
Class A and B - warning classes
Class C, D, E, F – stopping classes
Class Control – for control purposes via Logics Manager
Only class A does not use horn signal (external horn)

24. Generator and Engine protection
Whole range of protection functions including:
Voltage protection
Frequency protection
Power protection
Current protection
Speed (MPU) protection
Power Factor (PF) protection
Phase rotation
Operating range
Maintenance days / hours exceeded
Over-/Underspeed (MPU)
Unintended Stop
Engine Stop malfunction
Speed/frequency mismatch
Start failure
Charge alternator low voltage
Red stop lamp (J1939)
Amber warning lamp (J1939)
Battery over-/undervoltage

25. Mains Protection including:
#of trip levels
ANSI #
Over-voltage 2 59
Under-voltage 27
Over-frequency
81O
Under-frequency
81U
Voltage asymmetry 1 47
Phase shift 78
df/dt ( ROCOF ) 81
Sync-Check 25
Time dependent voltage (FRT)
According to some EU countries MV guidelines
Mains voltage increase
According to German Low Voltage Directive VDE-AR-N 4105

26. Miscellaneous protection
GCB / MCB fail to close
GCB / MCB fail to open
Synch. Time Out GCB / MCB
Phase rotation mismatch generator / busbar / mains
Mains decoupling
CAN bus communications monitoring (J1939, CANopen)
Parameter alignment (multiple units)
Missing members (multiple units)
EEPROM failure (internal CPU)
Wire break analog inputs
Discrete inputs
FlexLimitsTM for analog values

27. Communication ports Ethernet CAN 1 CAN 2 RS-485 USB
ToolKit
Modbus TCP
Remote panel
Load-sharing
CANopen
Ethernet
CAN 1
CAN 2
RS-485
USB
Extension cards (IKD 1, Phoenix)
J1939 messaging
Modbus RTU
Toolkit
All interfaces are galvanically (electrically) isolated

28. Communication ports ToolKit Peer-to-peer Documentation Modbus TCP
USB
ToolKit
Peer-to-peer
Documentation
USB
Modbus TCP
Ethernet
Modbus TCP
Load sharing
Tookit
Multiple units PC

29. CAN interfaces CAN 1 CAN 2 Guidance level Load sharing CANopen
32 units max
CAN 1
Digital expansion modules
CAN 2
Engine level
J1939 (ECU)
Extension cards
2x IKD 1
Phoenix
Analog expansion modules
Engine
Generator
ECU
GATEWAY
Phoenix
J1939

30. Remote Panel Generic Remote Panel Plug-n-Play Screen
24VDC
Generic Remote Panel
One single Part Number RP-3000XT is compatible to all Part Numbers of the easYgen-3000XT
For every future iteration on the easYgen software the Remote Panel remains unchanged
The RP-3000XT only supports the easYgen-3000XT controls (does not support easYgen-3000 controls)
Ethernet
easYgen-3100XT
easYgen-3200XT …
Plug-n-Play
Screen
Remote panel automatically detects all the connected easYgenXT controls
It does not require any easYgenXT related configuration files
Touch screen color display
7” screen size
800 x 400 pixels resolution

31. EasYgen 3100XT Metal housing easYgen-3100XT
Metal housing: no display, HMI via interfaces and DI
Same functionality as easYgen-3200XT
easYgen-3100XT

32. easYgen-3200XT – Accessories
Load Share Gateway - LSG
EPU-100
easYlite-100

33. easYgen-3200XT – Accessories
ProfiBus Gateway ESEPRO
CAN-Fiber Optic Gateway
Remote Access Gateway

34. easYgen-3200XT – Accessories
Digital Expansion Card IKD1 – 8DI/8DO (max. 32DI/32DO)
Phoenix Contact expansion cards – maximum 16AI, 4AO, 32DI and 32DO

35. easYgen-3200XT – Accessories
WAGO expansion cards – maximum 16AI, 4AO, 32DI and 32DO
Axiomatic J1939 thermocouples – 20 channels

36. Part numbers information
Can be found at